forum.excito.com

Hi
Thanks for the advise, but it had no effect.

I have borrowed a D-Link DUB-H7 USB 2.0 USB hub and I have attached it to Bubba and the ICY box.

So I'm still thinking that is driver issue.

Look at this post
http://forum.excito.net/viewtopic.php?t=1506

I have tested it little bit more. It works fine on both my windows laptop and stationary Ubuntu 8.10, so it is only Bubba that it does not work on :( (for some reason it is only the NTFS disk that gets auto Mounted by Ubuntu, and with my newly founded Linux skills I could find the other one: ) I hav...

Hi The disk are SATA so there is no Master/Slave :( The most likely answer to the problem (what I think) is that it is related to the power consumption. But I do not know how to test that I do not have any measurement equipment :( Above matrix prove that the disk works and the the 2 different slots ...

Hi At last, I have now tested some with udevinfo. I now have a matrix over the different output Device '/sys/block/sda' has major:minor 8:0 looking at class device '/sys/block/sda': SUBSYSTEM="block" SYSFS{dev}="8:0" SYSFS{range}="16" SYSFS{removable}="0" SYSF...

What I find rather surprising is that according to specs the icy box is delivered with a 2A power supply, which is not enough to power two hard disks. Thats why I think it pulls extra voltage from the desktop. I agree, it is wird. I do not have other SATA disk to try with :( and it should be a budg...

Have you tried running the disks one at a time in the cabinette and examine the output of udevinfo? By the way, is the above output all you get? I'm missing some parts. Have you tried udevmonitor (you need to be root to run it). Once started, connect the device and examine the output. /Johan I will...

Thanks for the input! why do I not read the data sheets more carefull?

It sounds like a probably cause. But the cabinett is not powerd by Bubba and it doesn't explain why it works in windows.

I have now change the hard drives position in the box. out put of dmesg usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning Vendor: ST316002 Model: 3AS Rev: Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sd...

I will try to swap the disk later today, I post an update later. Note: when I plugged the box in to my Ubuntu machine I only saw the other disk (ST325082)... when running udevinfo on sda I got "couldn't get the class device" when running sdb I got udevinfo starts with the device the node b...

Hi I have bought a ICY hard disk box, Link . It works quite good (in win XP) but little noisy. To the problem - my Linux skills, they suck. The cabinet contains two hard disk but I can only find one in Bubba. Output from dmesg usb-storage: waiting for device to settle before scanning Vendor: ST31600...

the how to is now created and you can find it here.

http://forum.excito.net/viewtopic.php?t=1397

This is a "how to" to install llink on Bubba Server I have used the instalation guid from http://www.lundman.net/wiki/index.php/Llink:Linux_installation . And I will change according to what 6feet5 helped me with on this post http://forum.excito.net/viewtopic.php?t=950 . I recomend using n...

I have not jet seen a whole movie but it seems to work great with llink on bubba. I have tryed a film that was a rared iso, I saw about 15 min and no problem! I will have more information in this weekend. Now it is movie time!!! I can put together a "howto" if there is a need. Thanks for a...

Thank you again Johan!!! This file, I think, contain help functions like log_daemon_msg and log_end_msg. correct Joahn, when I found that out I started to look for a alternative solution and find below code. I removed the link and added this code log_daemon_msg () { if [ -z "$1" ]; then re...