forum.excito.com

Is it known which processes/programs are writing to the disk so frequently and does anybody know if there is a way to find out which are the writing processes ? Because when it is just system logging, I could live with switching it off or creating a tmpfs where the files lie in RAM, causing no hdd w...

Have tested whilbone's testscript ( see below ) tonight, and as hoped it stopped the disk from going to idle 3 and in this way avoided the load cycles and the tempature was also stable, so the workaround works for the time beeing . . . while [ true ];do sleep 5 tail /var/log/messages >NUL done I am ...

I am not sure if this will work, because I am not sure if the messages file actually just lies on the disk or it is (partly) cached in RAM, in which case no disk access is needed and the disk could go to idle anyway. When I get home I will give your script a try, if it works you will see that the Po...

The model numbers are not the only affected models, it are just the few models for which WD has provided a firmware update. My WD10EACS ( 1 TB WD Green ) is definitely affected, but the just don't have released a new firmware which changes the idle-3 timer :( and therefore not in the list. In fact n...

Hello, as announced by Western Digital ( link 1 ) there are problems of wearing down there disks extremely quick due to there power saving features. What happens with the WD green disks is that after 8 second of "idle", they positioning the heads into a park position ( Idle 3 ), shortly af...

Hi Martijn, I solved the problem by adding the tun0 interface to my "interfaces" line in the smb.conf and as I remember ( have no access to my bubba at the moment ) the line below this "interfaces" had to be commented out to allow samba to broadcast on the tun0 interface, because...

Good news :D I'm very interested to read your instructions, because I just wanted to give it a try myself, but it will probably save a lot of time to follow your instructions rather than make all your mistakes again :wink: When do you think you will publish your experiances ?? Was it straigt forward...

Thanks Carl !!!!

This is how it has to be, good product with good support !

The passwort realy went in the passwort file you mentioned. After removing the passwort i could run dpkg --configure bubba-horde and dpkg --configure bubba-backend without problems.

Best regards,

Ton.

Hi, am back home now, so tried your set -x. Got an interesting output, where the script or something remembered the requested password of the first install run where the password was asked. ( dbc_dbadmpass=ABCDEFG ) Do you know where this is stored, because a grep did not realy find a config file wi...

Thanks for your quick reply ! But as I wrote I tried to redo the config with the following output : dpkg --configure bubba-horde Setting up bubba-horde (0.0.56) ... dbconfig-common: writing config to /etc/dbconfig-common/bubba-horde.conf Replacing config file /etc/horde/debian-db.php with new versio...

Hello, I did an update of my BUBBA 2 system, and found poblems with the auto configuration of the bubba-horde and bubba-backend, as seen in the log at the end of my post. What happened, first i did an apt-get update and upgrade, not installing all packages. After a reboot I did the apt-get dist-upgr...

Hi,

came across the following programm :
Freepops ( http://www.freepops.org/en/ )

Could work, if you e.g setup the freepops to fetch your emal from hotmail, and then let bubba ( or you direct from your PC ) pop the email from your Freepops.

Hope it helps . . .

BR

Ton.

Thanks for your quick response :D conferming my suspicious, i was just looking in this direction ... So as I untherstood, I should use e.g. DynDNS instead of easyfind from my fritzbox, so the dns reverse lookup can be done and it should work. Is there an ssh option ( restricting the dns lookup ) to ...

Hello, I experience problems accessing my bubba with ssh from the internet trough my fritzbox. My setup is following : ADSL <-> Fritzbox <-> Bubba <-> internal nw Port 22 forwarding to the Bubba is switched on in the fritzbox, and in the bubba2 config page I switched on the external wan ssh access, ...

Thanks for working on Bubba2 support, a working bubbamon would even improve the bubba experience

BR
Ton