forum.excito.com

Well, I gave up and gave in... I mailed it last week.

Anyone? Excito support has been underwhelming.

If someone has a clean copy of an installed 2.4 they're willing to post somewhere I can get I'd be happy to do it. I'm not sure what cloning my current copy of 2.0.5 to another HDD would accomplish, though. I had not emailed support yet but I suppose I should probably do that.

Ok, so I'm now at a complete loss. I replaced the ssd inside bubba with a mag hdd, and wiped the partition table & and everything from it so it is a blank slate, and it still does same behavior... hold power button, light on (flash drive, or external usb hdd, or whatever) blinks/comes on, b2 lig...

Ok, so that didn't work either. I can still log into the device, though, and nothing new that's interesting in the debug log. I think I might next try installing a different hard drive on the device and attempting to start from scratch; this leaves me with a "known good" installation that ...

Ubi, now that I know what the "code" is, I know what set of options to try and it will hopefully focus my efforts. I am about to try with a larger regular USB external HDD now (posting while it formats to fat32). I have not searched my specific model of SSD, but it was one of the ones reco...

And some more data: I was able to boot normally and connect to original installation; I am in fact posting this while using the b2 as a transparent proxy. Still can't get an install to take; this tells me a problem with install mechanism or USB key. Since I am on the device, are there any logs that ...

Now that I've calmed down a little bit, I'd like to add some more data, as well as ask some questions for clarification. I initially tried the upgrade with the PARTITION=0 and FORMAT=0 but when that didn't work I put them both back to 1 and those are the options I used for every ensuing attempt. - I...

Is there some way to troubleshoot the process to upgrade B2 from 2.0 to 2.4? Like get a terminal running so I can watch it and see where it's failing? All I can seem to find in the forums are spots where people had trouble then everything magically worked all of a sudden with no explanation of how t...

Eek, Good catch. I'd been thinking about just that the other day, but hadn't gotten around to it yet Thanks!

Do me a favor and and make the following two changes to your squidGuard.conf file:: 1. remove the entire time portion from your squidGuard.conf file. There have been some reported issues with this functionality. It will also stop squidGuard from writing to your log file every thirty seconds for each...

Can you post the contents of cache.log and squidGuard.log? They're probably located in /var/log/squid/ An indicator of your problem is probably in there somewhere. It may be helpful to post your squid.conf and/or your squidGuard.conf files. Please use the above command to remove all the comments and...

I don't know if maybe I had a "space cadet" moment or what - but for some reason my HTTPS wasn't working. When I thought about it, I hadn't accessed anything through that protocol since I installed squid. Anyway, you want to verify the following lines exist in your squid.conf: acl SSL_port...

Excellent howto! This worked perfectly for me. I made the following adaptations in my own execution of it, however: Transparent Proxy In squid.conf, I replaced acl lan src <wan ip> 192.168.1.0/24 http_access allow localhost http_access allow lan with acl lan src 192.168.10.0/24 http_access allow loc...

Ok - After stepping away for a day and coming back, I did some more research and came up with the following: http://forum.excito.net/viewtopic.php?t=1226 Turns out the mtu size issue was the problem I was having. I executed a ifconfig eth0 mtu 1500 from su and this solved the problem instantly. I th...