forum.excito.com

texan wrote:Munin can't draw any graphs if I can't install IF-MIB/NET-SNMP.

If you do an. I believe it is something .. snmp .. there, else search whit.

It's difficult to say, since I can't use the channel 13 to make a comparison. :) At the far end of the appartment I am catching a stronger signal from my neigbhour that is set to channel 9. The throughput is quite lower (and it breaks up quite often) at that particular point, so it might have to do...

Hi!
This is something i like to see on the B3 if it’s supported by the hardware.
http://www.altechnative.net/2011/05/22/ ... -on-fedora
Regards // Jallee

Thanks but I do not Linux very much. What should I do? brgds Ok. Start whit this http://wiki.excito.org/wiki/index.php/Tutorials_and_How-tos/Access_Server_via_SSH Then you have root access. Then edit the minidlna.conf file using the editor nano http://wiki.excito.org/wiki/index.php/Tutorials_and_Ho...

The Server shows in the Server list on my Onkyo 807 AV receiver but I cannot get access to the files. ( But I see all folders ). (DLNA) What can be wrong ? brdgs Ssh in to the bubba and edit minidlna.conf. It should look something like this as root.. #cat /etc/minidlna.conf album_art_names=Cover.jp...

* minidlna is supposed to support subtitles ? I give them the same name as the video file but they don't seem to be picked up. Check her http://sourceforge.net/projects/minidlna/forums it should work. * thumbnails for video are not generated by minidlna, is there a package or script for this on a f...

This is how i do. /etc/init.d/minidlna stop Edit /etc/minidlna.conf with your preferred dirs. nano /etc/minidlna.conf Remove old dlna db.. rm /var/lib/minidlna/files.db Then start minidlna. /etc/init.d/minidlna start Then check the log.. tail -f /var/log/minidlna.log Hope this helps..

If you get this in your mail.log... "warning: redirecting the request to postfix-owned data_directory /var/lib/postfix" "warning: redirecting the request to postfix-owned data_directory /var/lib/postfix" Edit main.cf... #nano /etc/postfix/main.cf and replace this .. #change # smt...

Check the file " /etc/postfix/main.cf " so b3.localdomain is in "mydestination" #cat /etc/postfix/main.cf smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # The command_directory parameter specifies the location of all # postXXX commands. # command_directory = /...

Krudtugle wrote:That would be a shame! I'm not even in charge of my own home network...

Tack för det, Televerket!

You are, read section 5 about Ethernet Bridge.
http://www.thomsonbroadbandpartner.com/ ... hp?id=6216

Ok.. If you want to use your B3 as firewall you should turn your Thomson to bridged mode.. And then configure your B3 to "Router / Firewall / Server mode" , and B2's manual works pretty god for B3. MVH // Jalle PS. Downloading the Thomson pdf as writing this, i do not know if you can put t...

I forgot my admin password and generally just wanted to "restart from scratch". So I followed the re-installation section in the manual. Boot from USB memory stick, the LED blinks for approximately 7 minutes (500GB disk) and then I am able to access http://bubba.local/ again. No manual po...

It's setup as suggestion nr 1. The ADSL modem is a Thomson modem from Telia, which is "plug'n'play". I haven't configured it manually at all. Ok... Then you should connect the Thomson directly to the LAN side on the B3 not the WAN.. And use only SERVER only mode under Network profile.. Bu...

Ok. how do your network look like?

Try to switch to manual "Router / Firewall / Server mode"
Then the wireless access should work.
// Jalle