New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !

Search found 31 matches

by Asad
15 Sep 2012, 11:18
Forum: B2 & B3 Support
Topic: SSD temperature
Replies: 1
Views: 4294

SSD temperature

Hi

I managed to replace the disk with a kingston SSD drive.

Is this normal temperature?

hddtemp /dev/sda
/dev/sda: KINGSTON SV200S364G: 73°C
by Asad
05 Sep 2012, 04:45
Forum: B2 & B3 Support
Topic: Running B3 without hard drive
Replies: 5
Views: 7715

Re: Running B3 without hard drive

Any guide on installing an SSD?
The use manual only states how to replace a normal SATA drive.
by Asad
05 Sep 2012, 03:51
Forum: B2 & B3 Support
Topic: Running B3 without hard drive
Replies: 5
Views: 7715

Running B3 without hard drive

Is it possible to remove the hard drive and run B3 normally?
I have another external server and don't really need the disk in there as it makes the B3 very hot (around 50C) and it is stored in a place with limited air getting inside.

Asad
by Asad
01 Oct 2011, 12:36
Forum: B2 & B3 Support
Topic: NAT rules stop working
Replies: 1
Views: 4036

NAT rules stop working

After updating to v2.3 from 2.2 I experence that forward rules keep stop working sometimes. I experienced this before as well. User defined open / forwarded ports Source IP Public port Private port Private IP Protocol all 80 80 192.168.10.58 tcp all 443 443 192.168.10.58 tcp all 22 22 192.168.10.58 ...
by Asad
08 Mar 2011, 03:51
Forum: B2 & B3 Support
Topic: B3 dies without errors
Replies: 123
Views: 115618

Re: B3 dies without errors

Ok sorry for that, i must have mixed the issue.
by Asad
07 Mar 2011, 16:29
Forum: B2 & B3 Support
Topic: B3 dies without errors
Replies: 123
Views: 115618

Re: B3 dies without errors

Collisions should not normally happen on a switch, but it could be that the switch is faulty. In such as case, it will loose network connectivity. It could also be that the port on the switch is either half or full duplex while the port on Bubba is set to different speed. When you say complete freez...
by Asad
07 Mar 2011, 15:58
Forum: B2 & B3 Support
Topic: B3 dies without errors
Replies: 123
Views: 115618

Re: B3 dies without errors

This is also the errors I get when it crashes, just did a dmesg now: [ 0.913701] cpuidle: using governor menu [ 0.917790] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 0.924131] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 0.966707] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ...
by Asad
08 Jan 2011, 16:25
Forum: B2 & B3 Support
Topic: Bubba kernel setting
Replies: 0
Views: 7342

Bubba kernel setting

I came across this setting and added it to the kernel, which made Bubba not die when running Squid. Perhaps it also helps to reduce other crash cases. It has to do with tcp congestion control.

echo 0 > /proc/sys/net/ipv4/tcp_ecn

Also look here:
http://trac.fonosfera.org/fon-ng/ticket/479
by Asad
03 Jan 2011, 14:57
Forum: B2 & B3 Support
Topic: B3 default mysql users
Replies: 3
Views: 5577

B3 default mysql users

+-----------+------------------+-------------------------------------------+ | host | user | password | +-----------+------------------+-------------------------------------------+ | localhost | root | | | b3 | root | | | 127.0.0.1 | root | | | localhost | debian-sys-maint | * | | localhost | horde ...
by Asad
03 Jan 2011, 14:54
Forum: B2 & B3 Support
Topic: B3 WiFi with LAN connection problem
Replies: 10
Views: 12768

Re: B3 WiFi with LAN connection problem

Bubba should be connected to whatever WAN device you have directly, so it gives IP direct to Bubba. do you get this in your syslog? Jan 3 11:59:10 b3 hostapd: wlan0: STA 00:24:d6:32:9b:66 WPA: received EAPOL-Key 2/2 Group with unexpected replay counter Jan 3 11:59:11 b3 hostapd: wlan0: STA 24:ab:81:...
by Asad
03 Jan 2011, 10:08
Forum: Bubba Server Support
Topic: vpn connection
Replies: 1
Views: 8728

Re: vpn connection

what kind of vpn are you using on Bubba? is it pptp vpn or ipsec vpn? check that your credentials are correct on both end.
by Asad
03 Jan 2011, 09:27
Forum: B2 & B3 Support
Topic: B3 WiFi with LAN connection problem
Replies: 10
Views: 12768

Re: B3 WiFi with LAN connection problem

I think if you don't use a switch with VLAN tagging, it will mix two networks in one collison domain which can create confusion for routers and the result will be unstable connection. It seems like this was the problem with me..

It also increases the risk of duplex mismatch in one side.
by Asad
03 Jan 2011, 09:03
Forum: B2 & B3 Support
Topic: B3 WiFi with LAN connection problem
Replies: 10
Views: 12768

Re: B3 WiFi with LAN connection problem

Also make sure the cable from the cable modem or ADSL modem is directly connected to Bubbas WAN port and not going through a switch.
by Asad
27 Dec 2010, 06:28
Forum: B2 & B3 Support
Topic: B3 photo album not accepting passwords
Replies: 0
Views: 6882

B3 photo album not accepting passwords

For some reason the photo album is not accepting users, I know that the admin user does not work, but normal users should be able to login.

//Edit problem solved: this seem to happen when SSL redirect is forced, switched back. seems like the album does not accept SSL connections.
by Asad
19 Dec 2010, 16:16
Forum: B2 & B3 Support
Topic: Installing OpenVPN
Replies: 2
Views: 6013

Re: Installing OpenVPN

not sure about this, but I would recommend strongswan or pptp vpn, they are on the wiki.