New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !

Search found 25 matches

by lognok
13 Jun 2020, 05:59
Forum: B2 & B3 Support
Topic: Old disk is dying, can I get just new disk?
Replies: 3
Views: 8901

Re: Old disk is dying, can I get just new disk?

Hi Valdis You should be able to replace the hdd with any standard 3.5 inch hdd with sata connector. Following is citet from: http://wiki.excito.com/w/index.php?title=About_Bubba Section Hardware and Expandability "Of course, B3's hard disk can fail, too. But you can easily swap the dead hard di...
by lognok
06 May 2018, 04:52
Forum: B2 & B3 Support
Topic: B3 replacement
Replies: 11
Views: 33659

Re: B3 replacement

Update: I bought the Linksys WRT1900ACS as a replacement for the B3. Background: The last OS I installed on the B3 was Arch (by sakaki). Few weeks after this, the WAP dropped connections to some clients, and would not allow re-connects. Another two weeks and all clients were unable to connect via WA...
by lognok
18 Feb 2018, 16:41
Forum: B2 & B3 Support
Topic: B3 replacement
Replies: 11
Views: 33659

B3 replacement

My B3 is EOL because it has become unstable. Setup and configuration is hit and miss. Therefore it is going to retire soon. What would you recommend as a replacement? Potential candidates so far are: http://www.compulab.com/products/iot-gateways/iot-gate-imx7-nxp-i-mx-7-internet-of-things-gateway/ h...
by lognok
18 Feb 2018, 15:58
Forum: Development
Topic: Bubbagen live-USB for B3 updated
Replies: 11
Views: 28047

Re: Bubbagen live-USB for B3 updated (Linux 4.4.39 LTS - Gentoo stable) + revision Apr 25

I wish it was that simple. The setup: LAN connected to my laptop WAN connected to the internet. Laptop got ip-address, could access the internet and ssh into B3, but there was no http://b3 available. I'm writing the above in past tense because right now (from the same usb-stick) I booted Bubbagen an...
by lognok
16 Feb 2018, 09:50
Forum: Development
Topic: Bubbagen live-USB for B3 updated
Replies: 11
Views: 28047

Re: Bubbagen live-USB for B3 updated (Linux 4.4.39 LTS - Gentoo stable) + revision Apr 25

Just for fun, I tried to boot the latest bubbagen 1.10.0 and it boots up fine.
But this time I can't access the web-gui on http://b3, but I can ssh root into it.

lognok
by lognok
16 Feb 2018, 09:21
Forum: Development
Topic: Bubbagen live-USB for B3 updated
Replies: 11
Views: 28047

Re: Bubbagen live-USB for B3 updated (Linux 4.4.39 LTS - Gentoo stable) + revision Apr 25

Thanks Downloaded and tried to install it, but I couldn't connect. No fault of the image, my B3 is unstable when installing OS's. Next I tried Arch and it worked, so that's what I ended up installing. Background: My B3 has been a pain to install OS's on since Excito stopped supporting/updating the O...
by lognok
11 Feb 2018, 16:35
Forum: Development
Topic: Bubbagen live-USB for B3 updated
Replies: 11
Views: 28047

Re: Bubbagen live-USB for B3 updated (Linux 4.4.39 LTS - Gentoo stable) + revision Apr 25

When I try to run /root/install_on_sda.sh it says 'No such file or directory'. b3 ~ # /root/install_on_sda.sh -bash: /root/install_on_sda.sh: No such file or directory b3 ~ # ls -l /root/install_on_sda.sh lrwxrwxrwx 1 root root 34 Nov 1 2015 /root/install_on_sda.sh -> //usr/local/sbin/install_on_sda...
by lognok
22 Dec 2016, 16:57
Forum: Test
Topic: Merry Christmas and a happy New Year
Replies: 0
Views: 75914

Merry Christmas and a happy New Year

Just wanted to wish everyone on this forum a Merry Christmas and a Happy New Year!

All the best in 2017 :)
by lognok
07 Dec 2016, 16:32
Forum: Development
Topic: Inspirational guide to setup LAN and WIFI on Jessie
Replies: 2
Views: 15097

Re: Inspirational guide to setup LAN and WIFI on Jessie

I'll take that as a compliment ahoff, thank you.

However, I think my guide is a little rough to be in a wiki, especially the part in the beginning about setting up the host computer for sharing connection to ssh into the B3. Also the guide has not been tested thoroughly (only two times...).
by lognok
06 Dec 2016, 17:45
Forum: Development
Topic: Inspirational guide to setup LAN and WIFI on Jessie
Replies: 2
Views: 15097

Inspirational guide to setup LAN and WIFI on Jessie

These are my steps from flashing Debian Jessie to having a lan- and wifi router on the B3, including DHCP and firewall. I have tried countless times to follow a guide or an idea, but kept loosing the big picture and forgetting the steps to success and failure. So I started to write down the steps an...
by lognok
18 Jun 2016, 17:22
Forum: Development
Topic: Debian jessie image 1.0 released for Bubba|2 / B3
Replies: 98
Views: 791518

Re: Debian jessie image 1.0 released for Bubba|2 / B3

After many attempts (and many nights...) at getting masquerading set up properly with UFW and Shorewall, I finally reinstalled Jessie and followed the guide sakaki linked to (I'm still not sure why I didn't follow the linked guide in the first place...). Anyway, I finally have a b3 with Debian 8, th...
by lognok
02 Jun 2016, 02:48
Forum: Development
Topic: Debian jessie image 1.0 released for Bubba|2 / B3
Replies: 98
Views: 791518

Re: Debian jessie image 1.0 released for Bubba|2 / B3

Am I suppose to bridge LAN and WAN to get access to the internet?

Right now I can access the b3 and the b3 can access the internet, but I cannot access the internet through the b3.
by lognok
30 May 2016, 18:34
Forum: Development
Topic: Debian jessie image 1.0 released for Bubba|2 / B3
Replies: 98
Views: 791518

Re: Debian jessie image 1.0 released for Bubba|2 / B3

hi sakaki

It worked!
Thank you for helping me all the way.
Now that I can ssh into the b3, I can finally get on with the setup :D


Again thanks a lot
All the best
lognok
by lognok
28 May 2016, 16:17
Forum: Development
Topic: Debian jessie image 1.0 released for Bubba|2 / B3
Replies: 98
Views: 791518

Re: Debian jessie image 1.0 released for Bubba|2 / B3

Hi sakaki Thanks for introducing me to journalctl. I didn't get to use the unit name filters as I didn't know what to look for (and what not to look for...). Instead I just took my time and scanned through the entire log, looking for something related to ip-stuff. I believe I found something interes...