New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !

Search found 37 matches

by elsbernd
09 Jul 2023, 12:32
Forum: Development
Topic: Bubbagen live-USB for B3 version 1.16 (Gentoo Linux 6.1.12 Stable)
Replies: 8
Views: 75134

Re: Bubbagen live-USB for B3 version 1.16 (Gentoo Linux 6.1.12 Stable)

Hello Gordon, I used gentoo for a third exito b3 and as a rescue system for the other debian installation. Since "reboot" won't work I thought I give a system-update a try to solve the problem. Since I'm not firm with gentoo, I used emaint --auto sync to update the USB-Installation (system...
by elsbernd
24 Jun 2023, 23:08
Forum: Development
Topic: Bubbagen live-USB for B3 version 1.16 (Gentoo Linux 6.1.12 Stable)
Replies: 8
Views: 75134

Problem with shutting down the system

Hello Gordon, After (changing destination drive and) installation I tried to reboot the system with several commands, which failed always with the same errors: b3c ~ # reboot WARNING: could not determine runlevel - doing soft reboot (it's better to use shutdown instead of reboot from the command lin...
by elsbernd
24 Jun 2023, 22:36
Forum: Development
Topic: Bubbagen live-USB for B3 version 1.16 (Gentoo Linux 6.1.12 Stable)
Replies: 8
Views: 75134

Re: Bubbagen live-USB for B3 version 1.16 (Gentoo Linux 6.1.12 Stable)

Hello Gordon, As I own more than one b3, I tried to use your Gentoo Linux on my second one. Since I want to install the system I looked at the script install_on_sda.sh. I installed a fresh/new SSD into the b3! So there no previous installation on that disk, and booted from USB A lsblk; df -h results...
by elsbernd
19 Jun 2023, 19:12
Forum: Development
Topic: Debian bookworm (12) image 1.0 released for B3
Replies: 30
Views: 477433

Re: Debian bookworm (12) image 1.0 released for B3

Thank you both Gordon/MouettE, It seems, I'm getting old. Cound'nt imagine that there is a system out there with the ancient 2TB limit. But well, my first B3 is from 2012. I Just installed it with 1800GB. Yes I know, 20GB is sufficient, but I'll try to create a system as a backup-System for my actua...
by elsbernd
19 Jun 2023, 12:52
Forum: Development
Topic: Debian bookworm (12) image 1.0 released for B3
Replies: 30
Views: 477433

Re: Debian bookworm (12) image 1.0 released for B3

Hello again. Since I own 4 Excitos B3 I bought a 4TB SSD for testing. Installation went smooth, but rebooting failed. Here is the intall.ini and protocol: [general] image = bookworm/bookworm-image-1.0-20230611-1733.tar.xz wipe = true size = full swap = 1024 reboot = true 2023-06-19 04:27:24.316 - IN...
by elsbernd
14 Jun 2023, 09:23
Forum: Development
Topic: Debian bookworm (12) image 1.0 released for B3
Replies: 30
Views: 477433

Re: Debian bookworm (12) image 1.0 released for B3

Hello MouettE, I just did it ... I destroyed my original Excito-Installation after more than ten years. Since I new, that bullseye could be installed on my backup-B3 I tried this with my main B3, but used the wrong image (buster) two days ago fully configured for my usage (mainly easyfind, timeachin...
by elsbernd
25 Sep 2022, 11:18
Forum: B2 & B3 Support
Topic: myownb3.com problems
Replies: 33
Views: 147797

Re: myownb3.com problems

Hello MouettE, Hope you're doing well. It seems, that the easyfind.pl on my old b3 tries to update trippstadt.myownb3.com to the IP-address to 88.180.91.xyz, but the address points still to 209.99.40.222. nslookup trippstadt.myownb3.com Server: 192.168.178.17 Address: 192.168.178.17#53 Non-authorita...
by elsbernd
22 Apr 2022, 08:05
Forum: Development
Topic: Debian bullseye (11) image 1.0 released for B3
Replies: 30
Views: 97715

Re: Debian bullseye (11) image 1.0 released for B3

I just upgraded my second B3 to bullseye. Bought them in 2012 (?). Still using it. The most complex thing was the replacement of the dead 3.5 disk with a Samsung SSD. I know the usage of screw drivers but haven't used them in recent years :-) Well, installation went smooth. Thank you very much for y...
by elsbernd
17 Apr 2022, 11:15
Forum: B2 & B3 Support
Topic: myownb3.com problems
Replies: 33
Views: 147797

Re: myownb3.com problems

Thank you again. Yes, various encryption standards have been marked as unsafe and deprecated over the years and although openssl still contains the code for it they have fairly recently set these standards to `disabled` by default[...]Didn't think that the reverse would also apply, i.e. a server not...
by elsbernd
17 Apr 2022, 09:22
Forum: B2 & B3 Support
Topic: myownb3.com problems
Replies: 33
Views: 147797

Re: myownb3.com problems

sorry to bother you (MouettE) again. As I run the old excito-software (behind a firewall), you actually made the easyfind.pl working again. It seems, that something went wrong again. When I run the script, the DNS name will actually be updated to the new IP-address, but only one or 2 minutes later, ...
by elsbernd
31 Mar 2022, 12:51
Forum: B2 & B3 Support
Topic: myownb3.com problems
Replies: 33
Views: 147797

Re: myownb3.com problems

:D
worked.
You mentioned "the old excito image" Are there new ones? Or can I update to a more recent one?
I heard something years ago, that other distros could be used, but never looked actually at them.
by elsbernd
30 Mar 2022, 06:09
Forum: B2 & B3 Support
Topic: myownb3.com problems
Replies: 33
Views: 147797

Re: myownb3.com problems

Thank you for maintaining easyfind. I'm still running a b3 with the old debian. :-) the external ID should be trippstadt.myownb3.com with IP-Address 84.180.157.132; but the dns entry remains on the old 84.180.91.90. Eaysfind.pl reports the error message in my last post. maybe something has changed a...
by elsbernd
27 Mar 2022, 09:02
Forum: B2 & B3 Support
Topic: myownb3.com problems
Replies: 33
Views: 147797

Re: myownb3.com problems

It seems to me, that easyfind has stopped working recently with the update error message: "Easyfind fehlgeschlagen mit folgendem Fehler: Antwort enthielt keinen gültigen Fehlercode. Server antwortet:Failed to connect to database server" I run the old /usr/lib/web-admin/easyfind.pl manually...
by elsbernd
03 Aug 2013, 09:25
Forum: Software releases
Topic: Release notes for Excito Bubba 2&3 software version 2.6
Replies: 114
Views: 262544

Re: Release notes for Excito Bubba 2&3 software version 2.6

The key thing here is that everything that's on the B3 and wasn't put on there by you, is there on purpose. and The installer doesn't go thinking spontaneously that it should go and ask elsbernd for a password, because it simply follows the programmer's rules whose mind never crossed the idea that ...
by elsbernd
02 Aug 2013, 11:40
Forum: Software releases
Topic: Release notes for Excito Bubba 2&3 software version 2.6
Replies: 114
Views: 262544

Re: Release notes for Excito Bubba 2&3 software version 2.6

What I think is that your system is f*cked up. Freedom, please calm down :-) The "true" story is: I changed the mysql login from none to something useful. I didn't notice that from then on the album feature didn't work any more. Well, I don't needed that feature. I only need a nas storage...