New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Search found 28 matches
- 17 Oct 2008, 09:02
- Forum: Bubba Server Support
- Topic: NFS on Bubba
- Replies: 15
- Views: 29213
Hi habrys Can you please explain to me in detail? how you gotten the Tvix to work with Bubba2? with SAMBA config. I have tried server name as bubba, bubba.local, bubba/storage/video, storage, video etc. but nothing works, PING is ok from the Tvix 6500 mediaplayer. Hi niklinds, I don't use bubba two...
- 19 Aug 2008, 04:38
- Forum: Bubba Server Support
- Topic: Networking performance with NFS
- Replies: 5
- Views: 9971
note 2: I have not tested HD video (only WMV9) and I am guessing this requires a lot from the Bubba CPU... I use Tvix / Bubba combo for watching HD movies (720p and sometimes 1080p) over wired network (100 Mbps) all the time without any stuttering or other problems. Torrent downloads in the backgro...
- 18 Jun 2008, 18:46
- Forum: Bubba Server Support
- Topic: NFS on Bubba
- Replies: 15
- Views: 29213
Yes, essentially correctly. On bubba: 1. Become root: su Provide root password when asked. 2. Modify /etc/apt/sources.list file in your editor of choice. It should look like that after modifying: deb http://ftp.se.debian.org/debian/ sarge main deb http://security.debian.org/ sarge/updates main deb h...
- 17 Jun 2008, 08:29
- Forum: Bubba Server Support
- Topic: NFS on Bubba
- Replies: 15
- Views: 29213
I used this howto with good results: http://linox.be/index.php/2005/08/16/putting_nfs_on_a_debian_sarge_server_and_client/ Don't forget to uncomment Debian repositories in /etc/apt/sources.list file and update the list of packages first (apt-get update). PS. I use an NFS share to play movies from Bu...
- 12 Jun 2008, 18:06
- Forum: Bubba Server Support
- Topic: Cannot fully start bubba anymore, some services available
- Replies: 4
- Views: 8319
I'd just like to let you know guys, that your help saved me like a week of backing up of my files. I used the method of 6feet5 with one small change. I stored all the system directories somewhere else instead of just removing them. Like this: mv /bin /old.system/bin mv /etc /old.system/etc Just in c...
- 10 Jun 2008, 04:27
- Forum: Bubba Server Support
- Topic: Cannot fully start bubba anymore, some services available
- Replies: 4
- Views: 8319
- 07 Jun 2008, 04:38
- Forum: Bubba Server Support
- Topic: Cannot fully start bubba anymore, some services available
- Replies: 4
- Views: 8319
Cannot fully start bubba anymore, some services available
I restarted bubba yesterday, after a few months of uninterrupted busy uptime. Sadly it didn't boot completely, the led never stopped blinking. I tried to wait about 1 hour or so and tried again (unplugging and then plugging the power cord again, since the shut down button doesn't work anymore). No l...
- 03 Dec 2007, 17:27
- Forum: Bubba Server Support
- Topic: Adding printer failed
- Replies: 3
- Views: 6450
I get following error when I try to switch on the printing service through the web interface: E [03/Dec/2007:22:34:56 +0100] LoadAllClasses: Unable to open /etc/cups/classes.conf - No such file or directory It can be seen in the /var/log/cups/error_log file. ...and from the /var/log/syslog: Dec 3 22...
- 03 Dec 2007, 10:35
- Forum: Bubba Server Support
- Topic: Slow file transfer to and from Bubba
- Replies: 7
- Views: 11502
Hi aliquis,
I've done some testing concerning transfer rates of my bubba w while ago. Take a look here, to get a feeling what should be possible.
I've done some testing concerning transfer rates of my bubba w while ago. Take a look here, to get a feeling what should be possible.
- 03 Dec 2007, 08:59
- Forum: Bubba Server Support
- Topic: Adding printer failed
- Replies: 3
- Views: 6450
- 02 Dec 2007, 05:56
- Forum: Bubba Server Support
- Topic: Adding printer failed
- Replies: 3
- Views: 6450
Adding printer failed
I have a problem with adding my printer on bubba through the web interface. Printing through bubba worked many months and a few days ago stopped. So I tried to switch the printing service off and then on. It didn't help, so next I tried to delete and then add again the printer through "printing...
- 05 Nov 2007, 14:26
- Forum: Bubba Server Feature requests
- Topic: Etch
- Replies: 8
- Views: 13940
Thanks a lot for answer, tor. It's certainly more important to have an improved torrent client, than the etch upgrade - for me personally too. Nonetheless good to hear, that the etch upgrade is still planned and going to happen soon. No problem for me to wait till Christmas or even a bit longer. Kee...
- 03 Nov 2007, 05:05
- Forum: Bubba Server Feature requests
- Topic: Etch
- Replies: 8
- Views: 13940
- 02 Nov 2007, 11:56
- Forum: Bubba Server Feature requests
- Topic: Etch
- Replies: 8
- Views: 13940
- 25 Sep 2007, 11:04
- Forum: Bubba Server Support
- Topic: Mono on bubba?
- Replies: 4
- Views: 7691