forum.excito.com

I've used fdisk to delete and re-create the partitions. The disk identifier is now 0x00000000. I don't understand what this means but I guess it's not a good thing. ~ # fdisk -l /dev/sdb Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sec...

nobody wrote:Did you activate the lv before you mounted the partition?

I found that the SysRescue CD automatically activates the LV.

nobody wrote:Did you activate the lv before you mounted the partition?

I used a SystemRescueCD for the test. I thought the SystemRescueCD automatically activated the LV, but now that you've asked the question I'm not so sure. I'll re-attach the drive to my PC and check again. Thanks for the question.

I've removed the HDD from the B2 and installed it in my PC. I can see the drive and mount the root partition, but it appears to be empty: ~ # ls /mnt/bubba/ lost+found fsck does not reveal any problems: ~ # fsck /dev/sdb1 fsck from util-linux 2.21.2 e2fsck 1.42 (29-Nov-2011) Bubba_root: clean, 11/12...

I disconnected the power, waited 30 seconds and re-connected it. All was well at first, but then the original problem returned. After disconnecting the power the second time, the unit would not boot up. Since then I've tried the rescue stick and tried to re-install the software, both without success...

My B2 has developed a problem. The web interface and SSH server have stopped working. I have tried to shut down the unit by depressing the power button for five seconds, but this has no effect and the HDD continues to spin and the LED continues to blink. I am reluctant to disconnect the power since ...