forum.excito.com

Hi MouettE,

works like a charm with your new version!!

Oh, I just wanted to tell you that I've found my mistake. I messed up with LOCALVERSION and EXTRAVERSION. Just in this moment I have sucessfully compiled the modules and they run fine with your yesterdays kernel(export LOCALVERSION="-1" did the trick). I'll try your update later this eveni...

I took your config and tried to add the missing modules. There was an error when I added all em28xx modules, as there is one that will support analogue dvb devices. I think this one is not needed. If it is deselected the config can be saved without errors. I tried to compile the modules but I'm stru...

Hi MouettE, thanks a lot for this fast solution. I found out from here: https://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_DVB-S2_Stick_(461e) that for the stick 461e the drivers em28xx, m88ds3103 and m88ts2022 are also needed. If I compare this with the modules that are loaded in arch linux it se...

Hi Gordon, yes, this was a pitfall in deed. It took a while until I realised that I have to set EXTRAVERSION="". Otherwise the modules will be installed as Version 3.18.44-1 + and the kernel will not load them. The other thing is that I could not find out which command is right to bild the...

Great! Thanks a lot for your effort!

I missed a line when quoting, but I hope the above mentioned modules are enough:

For all DVB USB devices you will need to load (if not compiled into the kernel):
i2c-core
crc32
firmware_class
dvb-core.ko
dvb-pll.ko

and maybe others too. (...)

I'm not really sure about the wording as I'm a 'kernel compilation newbie'. So the modules might be in the kernel sources but they are not compiled. In the linuxtv wiki it says: (See: https://www.linuxtv.org/wiki/index.php/DVB_via_USB) For all DVB USB devices you will need to load (if not compiled i...

Hi, thanks to this excellent forum I've got my b3 running with jessie and kernel 3.2.62 for a long time. The b3 is the center of the digital life of my family and hosts lots of services (dlna-media, file-Services, webmail, OwnCloud, pxe boot, ...) One of these services is a tvheadend-backend using a...

Hi, misty soul!

Thanks for your valuable hint. I read this thread before, but I did not understand everything

Now I found the option to update uboot with a usb stick. I did it and my bubba runs like a charm with the new(er) kernel.

Thanks again for this great work, MouettE.

Hi MouettE, great work! I'd like to test that version because this is what I've been looking for a long time. But I can't get it working. What is the base system I have to install this patch on? The original bubba distribution or your wheezy install Image? Do I have to do modifications to the u-boot...

Hi, when I try to log on as admin on the WAN interface via web, I get a message that admin logon is not possible on the WAN Interface. So I go Album, log on as admin, switch to home Screen (the house in the upper right Corner) and I am logged in to the web Interface as admin on the WAN interface. Ca...