forum.excito.com

hi, i have created a wordpress user with a symbolic link from his home (/home/wordpress) to /usr/share/wordpress but when wordpress ftps to wordpress home dir it does not follow the sym-link. is there a way to set default ftp dir for the wordpress user to /usr/share/wordpress rather than /home/wordp...

hi, i was using 2.9.2 with the 5min install but after allot of work could not get custom permalinks to work. yes i know about .htaccess files and AllowOverride in apache2.conf :) subsequently i have installed using apt-get install wordpress which installs only v. 2.0.12. but custom permalinks does w...

hi, i need to create a wordpress user on the b2. wordpress 3.0 beta 1 which i seem to be a beta tester of needs to have ftp sessions with the server and subsequently needs a username login ect... i believe the home folder for wordpress (the new user named wordpress) needs to be /usr/share/wordpress ...

i have upgraded to wordpress 3.0 beta 1 from the apt-get 2.0.12 wordpress install as follows... download and unpack wordpress 3.0 in /usr/share delete the <wordpress3.0>.zip file delete old database, delete /etc/wordpress/config-<yoursite>.com.php run /usr/share/doc/wordpress/examples/setup-mysql -n...

hi, i followed the instructions here to install on b2... http://linux.justinhartman.com/Wordpress_Installation_on_Debian there were a few warnings i ignored from the command "a2ensite example.com". then when i ran "/usr/share/doc/wordpress/examples/setup-mysql -n example example.com&q...

thanks

hi, how do i unzip a .zip file from the command line? when i try i get stuff like bubba:/home/admin/Wordpress/Themes# ls clear.1.2.4.zip bubba:/home/admin/Wordpress/Themes# pkunzip *.zip bash: pkunzip: command not found bubba:/home/admin/Wordpress/Themes# unzip *.zip bash: unzip: command not found b...

http://en.wikipedia.org/wiki/Fast_Ethernet#100BASE-TX


the first 8 chanels are physical.

the second two groups of calculations are logical and carried in the wires.

observe the units check.


the most authoritative place for you guys to get info on this is http://standards.ieee.org/

hi,

i seem to have resolved my problem. network manager was interfearing with my changes in /etc/network/interfaces. so i returned the file to its default state and setup the static ip address through the network manager gui.


thank you for all your help.

hi, well i have done all that. i updated the rule for my port forward so that port 1234 points to 192.168.10.2. i cannot ping the new server. but i can see it with lookup. after rebooting bubba and the new server dhcp is still giveing oznola (the new server) a lease on its old dhcp address. i think ...

hi,

so i just add the one line "192.168.10.2 oznola.localdomain oznola" to /etc/hosts then?

and then restart the dnsmasq.

thank you for your help.

the transfer rates posted by excito for the bubba are in units of bits not bytes. and usually those rates are distributed across some number of channels (i think its eight channels). if you read the definitions of these things such as Gb eithernet on wikipedia you can get the details. with the info ...

hi henry, ty for the help. i have gotten it to work like this... source ip=all public port=1234 (anything between 1024 and 65535) private pot=80 private ip=<private.ip.address> and then access the new server like this http://<ip.address>:1234 to my surprise i have two servers working like this now b...

hi rob, the bubba2 has a external static ip address already and it is working fine. i had to get this from my isp so i could use it as a lamp server. my bubba is configured as a server/router/firewall (scenario 4). the bubba router hands out dhcp addresses in the lease range of 192.168.10.50 to 192....

no it should not. i looked back over the thread and see that you created this thumb drive as a "rescue" stick. i have no experience with that. all i can suggest is that you follow the instructions for using the rescue drive in the excito manual. if you are successful then when you get done...