forum.excito.com

You shouldn't try to build the kernel from master branches in git because the repositories are probably broken for now. You should download the 3.2.62-1 tagged source from here : community-b3-kernel-debian-1-3.2.62-1.tar.gz untar and then follow the instruction on the wiki from 'Customizing the ker...

I think the kernel http://files.la-mouette.net/bubba/bubba3-kernel_3.2.62-1_powerpc.deb is not compiled with support for the rtl8192cu kernel-module. So I'm trying to compile it myself. What I did sofar is followings: svn co https://github.com/Excito/community-b3-kernel I get the directory communit...

It is very interesting idea to running Arch linux on Bubba 3, but can one do this on Bubba 2 too?

Hello everyone, After wheezy install image and u-boot update, I managed to patch and compile a 3.2.61 kernel package for the bubba3 and the bubba|two. I choose this version because it's the one debian uses in wheezy. It runs apparently fine on my b3 and on my b2, so I need some volunteers to test i...

Hello everyone, After wheezy install image and u-boot update, I managed to patch and compile a 3.2.61 kernel package for the bubba3 and the bubba|two. I choose this version because it's the one debian uses in wheezy. It runs apparently fine on my b3 and on my b2, so I need some volunteers to test i...

And because of uboot that I have now on my Bubba 2, the newest kernels can't be installed on my Bubba2, right? The u-boot bug that prevent newer kernel from booting does not affect the Bubba 2. You can boot it with newest kernel without upgrading u-boot. So, I can to install the linux-image-3.2.0-4...

johannes wrote:Did you see this?

http://wiki.excito.org/wiki/index.php/R ... Arch_Linux

Good stuff!

This link doesn't work anymore.
Are there another - working link - for this?

3. From where can I download the uboot image? 3. Maybe you should explain what you're trying to do now. If you're still on a b2 you should know that there is no uboot image available for download AFAIK. Yes, I'm still on my Bubba 2. I'm trying to install on Bubba 2 the newest kernel available. Now ...

Can I use a regular A-B USB cable as is described at this link bellow? http://forum.excito.net/viewtopic.php?t=1000 Short answer : No You need some logic to convert TTL signal to RS-232 (and then to USB if you don't have a serial connector on your PC). All right! A have finally the FTDI cable. 1. I...

MouettE wrote:I just received my new FTDI cable. After a quick test, I soldered it to the board, and it works fine. Awesome !

Can I use a regular A-B USB cable as is described at this link bellow?
http://forum.excito.net/viewtopic.php?t=1000

I just received my new FTDI cable. After a quick test, I soldered it to the board, and it works fine. Awesome ! Does it mean that that if one messed up once the uboot image on the flash memory on Bubba2 with this cable, she/he can to flash the uboot image again and again until she/he get the proper...

A good start would be to copy the bubbatwo_defconfig to linux-3.2.51/.config and run make oldconfig. Then you can run make menuconfig to adapt if you wish. Dont't forget to set the variables ARCH and CROSS_COMPILE before runinng the make commands. Good luck and please keep up posted of your progres...

So essentially this means that you need to have the serial console access to be able to upgrade uboot and thus it is not for the faint-hearted to prep their B3 for running a 3.x kernel. Can I use this image bellow for my Bubba2 too, to connect to the serial port? http://wiki.mybubba.org/wiki/index....

Hi, I red this very interesting topic from the beginning, but I'm not quite sure what should I do with my Bubba2 to get on it a running kernel version 3.2.51? I run as root the command on my Bubba2: strings /dev/mtd0 | grep "U-Boot " and get the output: VU-Boot 1.3.4-00056-gf6f51b1-dirty (...

Gordon wrote:Did you search the forum?

Sorry, I didn't. I'm going to search it now.