New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Search found 1526 matches
- 05 Jan 2012, 08:25
- Forum: B2 & B3 Support
- Topic: Dovecot problem receiving email from ISP IMAP mail account
- Replies: 14
- Views: 13420
Re: Dovecot problem receiving email from ISP IMAP mail accou
@Gordon, this works for me so this has to be a new issue (or that you meesed it up yourself, but I assume this can't be the case). :) What sw version are you on so I can try to reproduce? Hi Johannes, Running version is 2.3.2, but that is not the original install version. From what I gather, conf f...
- 04 Jan 2012, 13:36
- Forum: B2 & B3 Support
- Topic: Dovecot problem receiving email from ISP IMAP mail account
- Replies: 14
- Views: 13420
Re: Dovecot problem receiving email from ISP IMAP mail accou
Choosing this topic to express my annoyance (and possible solution for the topic starter). I never got around to setting up the mail server before because both my former and my current ISP is blocking port 25, but last week I saw mentioning of a secondary route through one of my ISP's servers; it's ...
- 04 Jan 2012, 12:16
- Forum: B2 & B3 Support
- Topic: [Solved] Refused email
- Replies: 10
- Views: 10796
Re: Refused email
Almost correct...
You should edit the first entry in this topic and change the subject there, so that the topic will show as [Solved] in the forum overview.
You should edit the first entry in this topic and change the subject there, so that the topic will show as [Solved] in the forum overview.
- 02 Jan 2012, 12:32
- Forum: B2 & B3 Support
- Topic: Wan dhcp does not work
- Replies: 10
- Views: 10111
Re: Wan dhcp does not work
Interesting topic, although the subject would hint otherwise :roll: Kind of in a similar situation after switching to fiber last week and being confronted with a "prepped" router from the provider. Apparently the ZTE 220N is a fabulous router, but not after they touched it and added blocks...
- 21 Dec 2011, 11:12
- Forum: B2 & B3 Support
- Topic: SSH access to NATted internal server
- Replies: 9
- Views: 10181
Re: SSH access to NATted internal server
Did you add both lines? Also, as I am referring to my own B3 I may have made the wrong assumption that you have a WiFi enabled B3. If yours does not have WiFi you need to change the outgoing interface br0 to eth1. Troubleshooting netfilter is not real easy. Afaik there's no debug option. You could p...
- 21 Dec 2011, 10:14
- Forum: B2 & B3 Support
- Topic: SSH access to NATted internal server
- Replies: 9
- Views: 10181
Re: SSH access to NATted internal server
Yes it does exist, but the modprobe command does not do anything. That's okay - it means the module is already loaded. I'm not sure what could be wrong - if I type the command at the prompt the rule gets added without issue. So let's recap with your values: iptables -t nat -A PREROUTING -i eth0 -p ...
- 21 Dec 2011, 09:42
- Forum: B2 & B3 Support
- Topic: SSH access to NATted internal server
- Replies: 9
- Views: 10181
Re: SSH access to NATted internal server
Hmmm, that's strange...
Although I did make quite a few changes to the original setup. Can you verify that "/lib/modules/2.6.38/kernel/net/ipv4/netfilter/iptable_nat.ko" exists? Or just try
Although I did make quite a few changes to the original setup. Can you verify that "/lib/modules/2.6.38/kernel/net/ipv4/netfilter/iptable_nat.ko" exists? Or just try
Code: Select all
# modprobe iptable_nat
- 21 Dec 2011, 08:15
- Forum: B2 & B3 Support
- Topic: SSH access to NATted internal server
- Replies: 9
- Views: 10181
Re: SSH access to NATted internal server
I'm sorry, my bad. I forgot to write down the target This is the correct line: ## Adds a portforwarding rule # iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport <ext_port> \ -j DNAT --to-destination <webserver>:22 ## Actually allow traffic to pass that way # iptables -A FORWARD -i eth0 -o ...
- 21 Dec 2011, 07:33
- Forum: B2 & B3 Support
- Topic: SSH access to NATted internal server
- Replies: 9
- Views: 10181
Re: SSH access to NATted internal server
Need two rules in the firewall: ## Adds a portforwarding rule # iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport <ext_port> \ --to-destination <webserver>:22 ## Actually allow traffic to pass that way # iptables -A FORWARD -i eth0 -o br0 -p tcp -m tcp -d <webserver> --dport 22 -j ACCEPT
- 21 Dec 2011, 05:02
- Forum: B2 & B3 Support
- Topic: Logitech Media Server
- Replies: 9
- Views: 10791
Re: Logitech Media Server
According to THIS post here it should be released shortly.
- 20 Dec 2011, 06:23
- Forum: B2 & B3 Support
- Topic: Need to connect to MySQL on port 3306
- Replies: 11
- Views: 12386
Re: Need to connect to MySQL on port 3306
Well then that explains the confusion. Yes, the WAN port is shielded by the firewall. So while plugging in the WAN connector is the quickest and easiest way to connect the Bubba to an existing LAN environment (because of the DHCP client), it will get you in trouble connecting to any of the Bubba hos...
- 19 Dec 2011, 16:42
- Forum: B2 & B3 Support
- Topic: Need to connect to MySQL on port 3306
- Replies: 11
- Views: 12386
Re: Need to connect to MySQL on port 3306
Is 192.168.x.0 the subnet that is connected to the Bubba LAN port or the WAN port
- 19 Dec 2011, 02:10
- Forum: B2 & B3 Support
- Topic: Need to connect to MySQL on port 3306
- Replies: 11
- Views: 12386
Re: Need to connect to MySQL on port 3306
Sounds like a routing/DNS issue. The firewall settings control just the outside (WAN) interface, so if this solves it for you that would imply that MySQL is communicating primarily over the WAN interface. It should be possible to verify this using netstat after you opened a session: # netstat -an | ...
- 18 Dec 2011, 14:51
- Forum: B2 & B3 Support
- Topic: Need to connect to MySQL on port 3306
- Replies: 11
- Views: 12386
Re: Need to connect to MySQL on port 3306
The default for MySQL is to create host-bound users. If you get phpMyAdmin you can easily verify that what you think is just user "jan" is in fact user "jan@bubba". If you want Jan to connect from any place the user should be named "jan@%". Unfortunately I do not know o...
- 18 Dec 2011, 14:20
- Forum: B2 & B3 Support
- Topic: Virtual hosts redirect to /admin
- Replies: 20
- Views: 24910
Re: Virtual hosts redirect to /admin
ah yes. This issue just keeps on popping up, there must be a dozen threads with this exact question, and the real issue is that the Bubba interface in not in a virtualhost. Should be an easy fix yes? Actually the Bubba interface is a a virtualhost, or are you referring to the /admin page? The quick...