forum.excito.com

Sorry Pa, No files with a suffix: bubba:~# ls -ltr /etc/apache2/conf.d total 4 -rw-r--r-- 1 root root 24 Mar 15 20:50 charset lrwxrwxrwx 1 root root 35 Jul 4 21:03 manual.conf -> /usr/share/bubba-manual/apache.conf lrwxrwxrwx 1 root www-data 23 Jul 4 21:05 horde.conf -> ../../horde/apache.conf lrwxr...

Hi, I probably rebooted to soon after the uprade, it was not yet at 100 % but after 50 min i thought it should be finished. Now i can logon via putty but there is no webserver running. tried to remove bubba-frontend and bubba-album and tried to reinstall it, but got the following: bubba:~# apt-get i...

Thanks for your reply Rob. I started using torrents since i've my B2, so i'm not familiar what to expect for transfer speed. I'm currently downloading a torrent (~20 seeds and ~38peers) but speeds are not going above 10kb/s (sometimes it goes to 15 for a minute), is this the speed i can expect ? Reg...

Thanks for the repy Johannes. 1) On my pc I don't use torrents, but download with with nzb files and grabit 2) I read about the upgrade this morning and I did the upgrade, although it didn't finish the first time because apache would't start anymore. So I rebooted B2 and apache still would't start. ...

Why is it that when i put a torrent in the download section of bubba2 it is very very slow (10 kb/s). If i download with nzb on pc it uses the full bandwith.
Do i have to tune something on B2?

(25/3) It's getting worse, below 1kb/s now ???

Martin

I adjusted the script to the tail on /var/log/messages, mentioned earlier in this post and that seems to slows it down. Sat Feb 21 21:00:45 CET 2009 Device Model: WDC WD1000FYPS-01ZKB0 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3454 193 Load_Cycle_Count 0x0032 083 083 000 Old_age Always - ...

Unfortunattely the script does not stops the increase of the load cycle on my disk :-( Sat Feb 21 20:24:16 CET 2009 Device Model: WDC WD1000FYPS-01ZKB0 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3453 193 Load_Cycle_Count 0x0032 083 083 000 Old_age Always - 351099 194 Temperature_Celsius 0x...

Thanks Carl, the bubba file did the trick. I recently renamed the file because i wanted to have 2 different files (bubba80 and bubba443) for better overview. I've changed bubba80 back to bubba (the links in sites-enabled as well) and now the problem is gone

Martin

I will replace my "problem" disk soon because it is already on 342000 load_cycles. But before I'll do that i want to make a copy/image of this "problem" disk. So i'm looking for a tool that can create such a copy/image. does anyone know a simple/good tool to do this ? Thanks in a...

I'm not sure if it is because of the update or that the error was already there, but i got following error with the dist-upgrade: # apt-get dist-upgrade Reading package lists... Done Building dependency tree... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upg...

Oeps, appearantly mine is over 300000 but sofar i did not encountered any problems. Device Model: WDC WD1000FYPS-01ZKB0 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3106 193 Load_Cycle_Count 0x0032 089 089 000 Old_age Always - 335934 194 Temperature_Celsius 0x0022 114 110 000 Old_age Always ...

Thans Hape, the "button push" method i remembered from the first few times i installed/reinstalled bubba. This was still in my head.
I now just put the power on and he's working again . Sometimes solutions are so obvious that you need someone else to get you there.

Thanks,

Martin

I initiated a "reboot" from the commandline but after that b2 never returned. Blue led kept on blinking, had to pull the power (on/off button didn't respond). Starting B2 with button pushed and power on, he starts to blink, released the button but B2 keeps on blinking, haven't got a clue w...

I came to the point where i should be greeted by the default config. (http://<domain>/spgm). The page appears and i see the "sample gallery" , but also the following error: Warning: mb_strstr() [function.mb-strstr]: Empty haystack in /home/web/spgm/spgm.php on line 975 which is following l...

Did you create a gallery2 database before you started the install of gallery2?

The gallery2 setup wont do that for you.

Check out the installation guide on this site:
http://codex.gallery2.org/Gallery2:Inst ... _on_Debian

PS mysql is already on your bubba, so you don't have to install it.