New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Search found 37 matches
- 10 Oct 2008, 15:49
- Forum: B2 & B3 Support
- Topic: Bubba behind firewall -- setup routing?
- Replies: 15
- Views: 19724
- 10 Oct 2008, 14:20
- Forum: B2 & B3 Support
- Topic: Bubba behind firewall -- setup routing?
- Replies: 15
- Views: 19724
- 09 Oct 2008, 16:28
- Forum: B2 & B3 Support
- Topic: Bubba behind firewall -- setup routing?
- Replies: 15
- Views: 19724
Yes, that's just what I did to get it working (/etc/network/interfaces) iface eth1 inet static address 192.168.1.99 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 1.1.1.23 d...
- 08 Oct 2008, 10:10
- Forum: B2 & B3 Support
- Topic: Bubba behind firewall -- setup routing?
- Replies: 15
- Views: 19724
- 08 Oct 2008, 09:04
- Forum: B2 & B3 Support
- Topic: Bubba behind firewall -- setup routing?
- Replies: 15
- Views: 19724
The gateway is greyed out in on the LAN page if you have a static address. It seems to me I should be using the WAN port, rather than the LAN port, since I'm not serving DHCP to clients and the WAN config screen has routing and DNS configuration options. I'd set the gateway to my router's address. M...
- 08 Oct 2008, 07:41
- Forum: B2 & B3 Support
- Topic: Bubba behind firewall -- setup routing?
- Replies: 15
- Views: 19724
When I'm on the box (ssh) I can't ping anything on the internet because the packets aren't routed correctly. I believe your solution is for allowing the internet to touch my box behind the firewall -- that's not the case I'm trying to solve -- unless I'm misunderstanding my own problem. my routing t...
- 07 Oct 2008, 20:47
- Forum: B2 & B3 Support
- Topic: Bubba behind firewall -- setup routing?
- Replies: 15
- Views: 19724
Bubba behind firewall -- setup routing?
I have BubbaII in configuration 6 from the manual: Internet -> fw/router -> bubbaII I have changed my LAN address to be on the fw/router network. So all machines on this side of the fw/router can see each other. But how do I get bubbaII to route through the fw/router to the internet? Do I just add t...