forum.excito.com

update.mybubba.org. Previously update.excito.org. The server that holds all the bubba related packages and corresponding sources, required to upgrade the B2|3 from a fresh install to the latest official release 2.6.0.1 This one has already been migrated. It's available on its previous addresses, (b...

Gordon wrote:What about the update server? I have a special interest in that for my Gentoo project.

Which update server are you talking about ?

Hi everyone, As some of you may have noticed, the wiki and this forum has been moved to the excito.com domain which is now owned by Rodeus. We will keep maintaining them in order for the community to continue exchanging on the Excito products. In a few weeks the easyfind infrastructure will follow, ...

If then I replace the image file in the install directory with the image created by Bootroot following the thread by MouettE I cannot boot the system. Unfortunately, my buildroot image is much larger than a typical kernel used by sakaki test, gentoo and arch images. This will probably cause higher ...

>>> Executing post-image script board/excito/bubbatwo/post_image.sh Compiling bubbatwo.dts Preparing vmlinux.bin Compiling reloc_shim_itb.S Generating 8313E21.itb board/excito/bubbatwo/post_image.sh: sor: 21: mkimage: command not found What can I do to solve this problem? I've added u-boot-tools to...

Your U-Boot version is correct and the same as ours. No need to copy anything. PS A method of updating the B2 software not via the usb ports appears to be needed. The B2 can boot : From the SATA drives From USB drives From the network (with tftp) The default configuration which resides on the flash ...

On the original excito install/rescue key : 8313E21.itb : the bubba 2 rescue image bubba.cfg : configuration for the excito install script install.itb : the b3 rescue image (no use on a bubba2) version : text file containing the version of the excito install/rescue system payload/bubbaroot-120319-11...

I suppose the gconfig is automatically loaded the excito_bubbatwo_defconfig, right? Yes Here I have a question. In the gconfig menu I may to choose between BusyBox or systemV. Because on Debian Jessie the systemd is the system and service manager, should I choose systemV instead of default choosed ...

Just noticed you're changing package sources on github. Will you be building packages and source archives as well? Can I rely on you assigning new revision numbers then? Yes there wil be new debian repositories with full binary and source packages. The version numbers will be incremented as normal ...

Just run the make command from the top directory (see README.md)

Hello, I'm currently working on an updated install/rescue system for b2/b3 (not the b1) with a new install script to install various systems. The install/rescue system is done and source is available at GitHub . It should build on any regular linux system (tested on arch and debian). It's based on b...

Try to reboot your b2 from ssh or web admin with screen or minicom opened on you serial line and tell us what you see.

However , before flashing anything, I'd want to be able to restore a working U-boot via the serial port if I bricked it (which I probably would!) In this earlier post , Johannes talks about using the B2's hardware bootloader to suck in an intermediate loader, and then the U-boot image, via the seri...

Scripts have been supplied (as part of the image) to simplify HDD installation, for those who wish to do so (this remains entirely optional). They are /root/install_on_sda.sh and /root/install_on_sda_gpt.sh (latter requires an updated U-boot); As far as I know, there is no updated U-Boot for the Bu...

Note: from what I read at Denx the normal u-boot executes what's in the bootcmd environment variable. I've got a strong feeling that this variable is ignored in the B3's u-boot and it executes bootalt1/-2 instead, depending on button state. That's not exactly how it works ; U-Boot specific B3 code ...