New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !

Release notes for BUBBA|TWO 1.2.2

Announcements of all software releases for Excito products
carl
Posts: 474
Joined: 07 May 2008, 04:41

Release notes for BUBBA|TWO 1.2.2

Post by carl »

Release notes for BUBBA|TWO 1.2.2
This is a bugfix upgrade to the Bubba|TWO 1.2.1 release.

Upgrade
To upgrade a running system, make sure you don't have any activities running such as uploads, downloads, print jobs etc. Then log in as admin in web-ui. Choose "settings" menu entry. Choose "Update" in the sub menu. Press the "Update" button.

Bugfixes
This release fixes the issue regarding restoring RAID when the internal disk has failed.
/Carl Fürstenberg, Excito Software Developer
http://www.excito.com
support@excito.com
davidI
Posts: 49
Joined: 07 Oct 2008, 13:39

Re: Release notes for BUBBA|TWO 1.2.2

Post by davidI »

I'm getting the following message when I try to upgrade:
Failed to access MySQL with default root login, unable to continue with upgrade.
Given that changing the mysql root password is AN ESSENTIAL PART OF SECURITY MANAGEMENT on any system connected to the internat it is VERY disappointing that the install system only works with the default password - which everyone, not only the folks at excito, will know.
BreezerSwe
Posts: 16
Joined: 12 Oct 2008, 18:21

Re: Release notes for BUBBA|TWO 1.2.2

Post by BreezerSwe »

Hi!
After upgrading to v1.2.2 I get the following error message when connecting my external harddrive through the usb.

A PHP Error was encountered
Severity: Warning
Message: Invalid argument supplied for foreach()
Filename: disk/disk_view.php
Line Number: 11

Could it be a bug?

/Johan
pa
Posts: 308
Joined: 06 Dec 2006, 04:38
Location: Sweden
Contact:

Re: Release notes for BUBBA|TWO 1.2.2

Post by pa »

Can you post the part from the syslog when you connect you disk?

If you reconnect it it should be at the end of the log ("Settings->Logs -> syslog") and say something about "/dev/sdb". Post the section around that entry.

/PA
BreezerSwe
Posts: 16
Joined: 12 Oct 2008, 18:21

Re: Release notes for BUBBA|TWO 1.2.2

Post by BreezerSwe »

Oct 1 22:14:27 bubba kernel: usb 1-1.2: new high speed USB device using fsl-ehci and address 4
Oct 1 22:14:27 bubba kernel: usb 1-1.2: configuration #1 chosen from 1 choice
Oct 1 22:14:27 bubba kernel: scsi5 : SCSI emulation for USB Mass Storage devices
Oct 1 22:14:27 bubba kernel: usb-storage: device found at 4
Oct 1 22:14:27 bubba kernel: usb-storage: waiting for device to settle before scanning
Oct 1 22:14:32 bubba kernel: scsi 5:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
Oct 1 22:14:32 bubba kernel: sd 5:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
Oct 1 22:14:32 bubba kernel: sd 5:0:0:0: [sdc] Write Protect is off
Oct 1 22:14:32 bubba kernel: sd 5:0:0:0: [sdc] Mode Sense: 21 00 00 00
Oct 1 22:14:32 bubba kernel: sd 5:0:0:0: [sdc] Assuming drive cache: write through
Oct 1 22:14:32 bubba kernel: sd 5:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
Oct 1 22:14:32 bubba kernel: sd 5:0:0:0: [sdc] Write Protect is off
Oct 1 22:14:32 bubba kernel: sd 5:0:0:0: [sdc] Mode Sense: 21 00 00 00
Oct 1 22:14:32 bubba kernel: sd 5:0:0:0: [sdc] Assuming drive cache: write through
Oct 1 22:14:32 bubba kernel: sdc: sdc1
Oct 1 22:14:32 bubba kernel: sd 5:0:0:0: [sdc] Attached SCSI disk
Oct 1 22:14:32 bubba kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0
Oct 1 22:14:32 bubba kernel: usb-storage: device scan complete
Skaven
Posts: 26
Joined: 02 Mar 2009, 10:06

Re: Release notes for BUBBA|TWO 1.2.2

Post by Skaven »

i haw the same problem

A PHP Error was encountered
Severity: Warning
Message: Invalid argument supplied for foreach()
Filename: disk/disk_view.php
Line Number: 11
Skaven
Posts: 26
Joined: 02 Mar 2009, 10:06

Re: Release notes for BUBBA|TWO 1.2.2

Post by Skaven »

i forget to say i haw pnly the internel disk i dount us e-sata or usb connected when i get the error




Skaven wrote:i haw the same problem

A PHP Error was encountered
Severity: Warning
Message: Invalid argument supplied for foreach()
Filename: disk/disk_view.php
Line Number: 11
pa
Posts: 308
Joined: 06 Dec 2006, 04:38
Location: Sweden
Contact:

Re: Release notes for BUBBA|TWO 1.2.2

Post by pa »

This seems odd, can you post the boot-log?

Reboot and the log in as admin, then Settings->Logs and choose syslog.

Post the output from the reboot.

/PA
BreezerSwe
Posts: 16
Joined: 12 Oct 2008, 18:21

Re: Release notes for BUBBA|TWO 1.2.2

Post by BreezerSwe »

I still have the same problem and due to the fact that everything worked fine before the upgrade with the same external disk, doesn't it mean that a bug must have slipped through? Is there anything else I can investigate? I would really appreciate a solutions soon since I'm using that external disk pretty often.

BR
Johan
BreezerSwe wrote:Hi!
After upgrading to v1.2.2 I get the following error message when connecting my external harddrive through the usb.

A PHP Error was encountered
Severity: Warning
Message: Invalid argument supplied for foreach()
Filename: disk/disk_view.php
Line Number: 11

Could it be a bug?

/Johan
BreezerSwe
Posts: 16
Joined: 12 Oct 2008, 18:21

Re: Release notes for BUBBA|TWO 1.2.2

Post by BreezerSwe »

This is from the debug log:
Oct 5 21:25:47 bubba kernel: usb-storage: device found at 3
Oct 5 21:25:47 bubba kernel: usb-storage: waiting for device to settle before scanning
Oct 5 21:25:52 bubba kernel: sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00
Oct 5 21:25:52 bubba kernel: sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00
Oct 5 21:25:52 bubba kernel: usb-storage: device scan complete

And here are some more logs from SysLog:
Oct 5 18:23:42 bubba kernel: usb 1-1.2: new high speed USB device using fsl-ehci and address 5
Oct 5 18:23:42 bubba kernel: usb 1-1.2: configuration #1 chosen from 1 choice
Oct 5 18:23:42 bubba kernel: scsi6 : SCSI emulation for USB Mass Storage devices
Oct 5 18:23:42 bubba kernel: usb-storage: device found at 5
Oct 5 18:23:42 bubba kernel: usb-storage: waiting for device to settle before scanning
Oct 5 18:23:47 bubba kernel: scsi 6:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
Oct 5 18:23:47 bubba kernel: sd 6:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
Oct 5 18:23:47 bubba kernel: sd 6:0:0:0: [sdc] Write Protect is off
Oct 5 18:23:47 bubba kernel: sd 6:0:0:0: [sdc] Mode Sense: 21 00 00 00
Oct 5 18:23:47 bubba kernel: sd 6:0:0:0: [sdc] Assuming drive cache: write through
Oct 5 18:23:47 bubba kernel: sd 6:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
Oct 5 18:23:47 bubba kernel: sd 6:0:0:0: [sdc] Write Protect is off
Oct 5 18:23:47 bubba kernel: sd 6:0:0:0: [sdc] Mode Sense: 21 00 00 00
Oct 5 18:23:47 bubba kernel: sd 6:0:0:0: [sdc] Assuming drive cache: write through
Oct 5 18:23:47 bubba kernel: sdc: sdc1
Oct 5 18:23:47 bubba kernel: sd 6:0:0:0: [sdc] Attached SCSI disk
Oct 5 18:23:47 bubba kernel: sd 6:0:0:0: Attached scsi generic sg1 type 0
Oct 5 18:23:47 bubba kernel: usb-storage: device scan complete

I hope it will help you find what's wrong.

/Johan

BreezerSwe wrote:I still have the same problem and due to the fact that everything worked fine before the upgrade with the same external disk, doesn't it mean that a bug must have slipped through? Is there anything else I can investigate? I would really appreciate a solutions soon since I'm using that external disk pretty often.

BR
Johan
BreezerSwe wrote:Hi!
After upgrading to v1.2.2 I get the following error message when connecting my external harddrive through the usb.

A PHP Error was encountered
Severity: Warning
Message: Invalid argument supplied for foreach()
Filename: disk/disk_view.php
Line Number: 11

Could it be a bug?

/Johan
Skaven
Posts: 26
Joined: 02 Mar 2009, 10:06

Re: Release notes for BUBBA|TWO 1.2.2

Post by Skaven »

nu har jag gjort en logg beronde på den är stor så har jag laddat upp den på min server så gå till denna adress

http://web.me.com/golaby/error01.txt

because my log is so big i haw uploaded it to my werbserver

http://web.me.com/golaby/error01.txt
pcrene
Posts: 305
Joined: 17 May 2008, 15:49

Re: Release notes for BUBBA|TWO 1.2.2

Post by pcrene »

tip:

the install wants to create a "video" folder in the /home/storage. I had already a video folder
so the bubba userinterface (frontend and diskmanager) would not install.

after the removal of MY video folder the install went OK.

Rene
B3 1T + B-Stor 2T, B2 1T as backup
40 users active....
Opensat4all.Com
carl
Posts: 474
Joined: 07 May 2008, 04:41

Re: Release notes for BUBBA|TWO 1.2.2

Post by carl »

pcrene wrote:tip:

the install wants to create a "video" folder in the /home/storage. I had already a video folder
so the bubba userinterface (frontend and diskmanager) would not install.

after the removal of MY video folder the install went OK.

Rene
That was really strange; The only thing that want to create an video folder is bubba-backend, and it checks so that there isn't a folder known as video first; Though it only checks for folder, not for any other type of file; could it be you had an symlink there pointing to an dir?
/Carl Fürstenberg, Excito Software Developer
http://www.excito.com
support@excito.com
pcrene
Posts: 305
Joined: 17 May 2008, 15:49

Re: Release notes for BUBBA|TWO 1.2.2

Post by pcrene »

Hello Carl,

It happend twice, due to a power failure my disk got a bit damaged, a re-install
repaired that part. The first time i metioned it here and got help to do it using
apt-get. I saw it happen again, thats why i do the updates only with apt-get
The video folder on my B2 was a link to the a video folder on th bugga2 external disk.

Rene
B3 1T + B-Stor 2T, B2 1T as backup
40 users active....
Opensat4all.Com
carl
Posts: 474
Joined: 07 May 2008, 04:41

Re: Release notes for BUBBA|TWO 1.2.2

Post by carl »

pcrene wrote:Hello Carl,

It happend twice, due to a power failure my disk got a bit damaged, a re-install
repaired that part. The first time i metioned it here and got help to do it using
apt-get. I saw it happen again, thats why i do the updates only with apt-get
The video folder on my B2 was a link to the a video folder on th bugga2 external disk.

Rene
Yes, I've identified the problem and had updated the sources now to check for the existance of the directory/file instead of only check if there is an directory there; This fix will be due to next upgrade. (in a couple of weeks).


/Carl
/Carl Fürstenberg, Excito Software Developer
http://www.excito.com
support@excito.com
Post Reply