Page 6 of 6

Re: Release notes for BUBBA|2 1.3.0

Posted: 14 Mar 2010, 07:49
by citro
In my case the samba issue was due to that the update changed the workgroup on my bubba to excito. When I changed it back to workgroup it worked. Don know why though :?:

Re: Release notes for BUBBA|2 1.3.0

Posted: 17 Mar 2010, 08:44
by wm.bubba
The workgroup on my bubba had also been changed to 'excito'
However, in my case changing this to anything else does not fix the Samba problem.

Re: Release notes for BUBBA|2 1.3.0

Posted: 17 Mar 2010, 14:56
by Agaresch
In my case the workgroup was the same after the update as it was before.
When it comes to what version of the firmware I had before the upgrade I'm not really sure. Either 1.2.3 or 1.2.4

Cheers

Re: Release notes for BUBBA|2 1.3.0

Posted: 27 Mar 2010, 09:45
by Harry
When I finally decided to update to the latest release things didn't go that well.
The upgrade was almost finished when it stalled and just wouldn't continue.
When I try to start the update again I pretty soon get the following message "Failures found in package (dpkg) database, unable to continue with upgrade."
Any suggestions on how to get things back in order again?
My Bubba2 seems to be working fine otherwise, it's just that i don't dare to reboot it and obviously cant do the upgrade.

Cheers Harry

Re: Release notes for BUBBA|2 1.3.0

Posted: 27 Mar 2010, 16:30
by RobV
Hi Harry,
I just advise you to read this entire thread and to pay special attention to following post:
http://forum.excito.net//viewtopic.php?p=10385#p10385
Regards, RobV

Re: Release notes for BUBBA|2 1.3.0

Posted: 28 Mar 2010, 01:50
by Harry
Thanks RobV!

It was definitely the "Horde issue" that was the problem.
Strangely enough Bubba reports version 1.2.4 under the home tab even though I was able to finish the upgrade and the Current package versions is as follows:

Package name Package version
bubba-frontend 1.3.1
bubba-backend 1.3.3
bubba-album 1.3.0
filetransferdaemon 0.50.19+b3
squeezecenter 7.4.1.dfsg1-6V

Re: Release notes for BUBBA|2 1.3.0

Posted: 31 Mar 2010, 16:59
by Moloko
Same here, upgrade to 1.3.1 Samba does not start automatically after reboot.

Re: Release notes for BUBBA|2 1.3.0

Posted: 10 Apr 2010, 17:27
by johannes
alanb, are you sure it has the latest software? Did you try an upgrade?

Thanks,
/Johannes

Re: Release notes for BUBBA|2 1.3.0

Posted: 19 Apr 2010, 03:59
by johannes
Very strange, and nothign we recognize. Could you try the latest software (2.0)? If you don't get it working, please email support@excito.com and you'll get help from the sw developers directly.

Re: Release notes for BUBBA|2 1.3.0

Posted: 19 May 2010, 10:37
by kastrom
Since the upgrade the downloads doesn't work anymore. Anyone else?

/Kent

Re: Release notes for BUBBA|2 1.3.0

Posted: 19 May 2010, 11:12
by RobV
Strange, Download continued working for me after the upgrade to 1.3.0.
Important to notice that a further upgrade to 2.0 improved the Download stability significantly. :D
Regards, RobV

Re: Release notes for BUBBA|2 1.3.0

Posted: 21 May 2010, 09:28
by kastrom
Sorry, posted this in the wrong forum, I don't have 1.3.0.

/Kent