Release notes for Excito Bubba 2 software version 2.4-RC1

Announcements of all software releases for Excito products
aardric
Posts: 10
Joined: 04 Jul 2009, 15:01

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Post by aardric » 21 Mar 2012, 23:09

Hail,
I installed RC1 on two B2's following the steps outlined on the wiki and the procedure worked as advertised, however, upon applying the same procedure to RC3, one B2 came up (it works quite well now) but the other (the older one) will not pass the 2 Hz blinking light stage. I tried about 1 dozen times, waiting a couple of minutes with power off and holding down the button for different amounts of time but with no success. Comments, suggestions?

aardric
Posts: 10
Joined: 04 Jul 2009, 15:01

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Post by aardric » 22 Mar 2012, 14:10

Hail,
Ignore my previous post regarding B2 not loading RC3; my fault.

ryz
Posts: 183
Joined: 12 Feb 2009, 06:03

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Post by ryz » 22 Mar 2012, 17:11

It looks like the 2.4.1 has been release quietly at least it is that version you do get when you go to the
"support"->"downloads" Bubba2 "Re-install image" from the home page. It seems to have been uploaded on mars the 19:th.

86ivar
Posts: 148
Joined: 02 Oct 2010, 11:08

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Post by 86ivar » 22 Mar 2012, 18:37

I want to install without deleting my storage, i set the format to FORMAT=0, but what abaout PARTITION=1 ?
should it be 0 too? do i have to do any more changes? Thank you

RandomUsername
Posts: 904
Joined: 09 Oct 2009, 18:49

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Post by RandomUsername » 23 Mar 2012, 04:16

Yes, you should set the partition option to 0 too. Can't remember what other options there are.

Caper
Posts: 13
Joined: 17 Apr 2009, 08:12

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Post by Caper » 23 Mar 2012, 05:13

86ivar wrote:I want to install without deleting my storage, i set the format to FORMAT=0, but what abaout PARTITION=1 ?
should it be 0 too? do i have to do any more changes? Thank you
http://wiki.excito.org/wiki/index.php/R ... a.3F.C2.A0

johannes
Posts: 1470
Joined: 31 Dec 2006, 07:12
Location: Sweden
Contact:

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Post by johannes » 23 Mar 2012, 12:12

Now we finally managed to released the stable version: http://forum.excito.net/viewtopic.php?f=1&t=3758

On a more personal note - I apologize for the delay. I hope we can server you better from now on.
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)

RandomUsername
Posts: 904
Joined: 09 Oct 2009, 18:49

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Post by RandomUsername » 23 Mar 2012, 12:19

johannes wrote:Now we finally managed to released the stable version: http://forum.excito.net/viewtopic.php?f=1&t=3758

On a more personal note - I apologize for the delay. I hope we can server you better from now on.

Thanks Johannes. I appreciate all your efforts.

mountaindude
Posts: 57
Joined: 25 Aug 2007, 11:56

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Post by mountaindude » 26 Aug 2012, 14:34

pmurphy wrote:Does anyone have Java successfully installed after this latest update? Just wondering as I'm about to upgrade my own Bubba 2. Would like to try and install linux version of CrashPlan which depends on Java version 1.6+ - it's probably impossible based on their machine requirements, but I'm going to give it a go. http://www.crashplan.com/consumer/downl ... l?os=Linux
pmurphy, did you have any luck running CrashPlan on a Bubba 2?
I'd like to do the same, but suspect it might be asking too much of the poor little B2...

Post Reply