Page 4 of 4

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Posted: 21 Mar 2012, 23:09
by aardric
Hail,
I installed RC1 on two B2's following the steps outlined on the wiki and the procedure worked as advertised, however, upon applying the same procedure to RC3, one B2 came up (it works quite well now) but the other (the older one) will not pass the 2 Hz blinking light stage. I tried about 1 dozen times, waiting a couple of minutes with power off and holding down the button for different amounts of time but with no success. Comments, suggestions?

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Posted: 22 Mar 2012, 14:10
by aardric
Hail,
Ignore my previous post regarding B2 not loading RC3; my fault.

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Posted: 22 Mar 2012, 17:11
by ryz
It looks like the 2.4.1 has been release quietly at least it is that version you do get when you go to the
"support"->"downloads" Bubba2 "Re-install image" from the home page. It seems to have been uploaded on mars the 19:th.

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Posted: 22 Mar 2012, 18:37
by 86ivar
I want to install without deleting my storage, i set the format to FORMAT=0, but what abaout PARTITION=1 ?
should it be 0 too? do i have to do any more changes? Thank you

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Posted: 23 Mar 2012, 04:16
by RandomUsername
Yes, you should set the partition option to 0 too. Can't remember what other options there are.

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Posted: 23 Mar 2012, 05:13
by Caper
86ivar wrote:I want to install without deleting my storage, i set the format to FORMAT=0, but what abaout PARTITION=1 ?
should it be 0 too? do i have to do any more changes? Thank you
http://wiki.excito.org/wiki/index.php/R ... a.3F.C2.A0

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Posted: 23 Mar 2012, 12:12
by johannes
Now we finally managed to released the stable version: http://forum.excito.net/viewtopic.php?f=1&t=3758

On a more personal note - I apologize for the delay. I hope we can server you better from now on.

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Posted: 23 Mar 2012, 12:19
by RandomUsername
johannes wrote:Now we finally managed to released the stable version: http://forum.excito.net/viewtopic.php?f=1&t=3758

On a more personal note - I apologize for the delay. I hope we can server you better from now on.

Thanks Johannes. I appreciate all your efforts.

Re: Release notes for Excito Bubba 2 software version 2.4-RC

Posted: 26 Aug 2012, 14:34
by mountaindude
pmurphy wrote:Does anyone have Java successfully installed after this latest update? Just wondering as I'm about to upgrade my own Bubba 2. Would like to try and install linux version of CrashPlan which depends on Java version 1.6+ - it's probably impossible based on their machine requirements, but I'm going to give it a go. http://www.crashplan.com/consumer/downl ... l?os=Linux
pmurphy, did you have any luck running CrashPlan on a Bubba 2?
I'd like to do the same, but suspect it might be asking too much of the poor little B2...