Bubba community forum
https://forum.excito.com/
Check admin -> network -> Tor!Ubi wrote:I couldn't find any reference to TOR in the admin interface at all. Well hidden it is.
which reminds me: the default interface is bugged in Opera 11.61.
Yes, this is upnp, so that when enabled, it tries to open up port 80 in your main router, to simplify setup to get remote access for non-techy users.RandomUsername wrote:UpnpUbi wrote:k tnx
oh and wtf is this "Remote access through other router" option?. That just has to be the most cryptic description ever. What is this thing? Why is it on by default?
Code: Select all
root@b3:/etc# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
4 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue [Y/n]?
Setting up forked-daapd (0.19-1~bpo60+1) ...
adduser: The GID 65534 does not exist.
dpkg: error processing forked-daapd (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of bubba-backend:
bubba-backend depends on forked-daapd; however:
Package forked-daapd is not configured yet.
dpkg: error processing bubba-backend (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of bubba-frontend:
bubba-frontend depends on bubba-backend (>= 1.0.19); however:
Package bubba-backend is not configured yet.
dpkg: error processing bubba-frontend (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of bubba:
bubba depends on bubba-backend; however:
Package bubba-backend is not configured yet.
bubba depends on bubba-frontend; however:
Package bubba-frontend is not configured yet.
dpkg: error processing bubba (--configure):
dependency problems - leaving unconfigured
configured to not write apport reports
configured to not write apport reports
configured to not write apport reports
configured to not write apport reports
Errors were encountered while processing:
forked-daapd
bubba-backend
bubba-frontend
bubba
E: Sub-process /usr/bin/dpkg returned an error code (1)
65534) followed by the "apt-get dist-upgrade".Hello Winston,winston wrote:carl wrote:What you will have to do is to upgrade manually from the command line, using following instructions:deubler wrote:Hi,
I get the message "Upgrade halted: Nothing to upgrade". I have a custom version due to manual downgrade of Squeezecenter to resolve database issues with 2.3.1.1/ SqC 7.6.1 :
Package name Package version
bubba 2.3.1.1
bubba-album 2.3
bubba-backend 2.3.1
bubba-frontend 2.3.1
bubba3-kernel 2.6.38-1
filetransferdaemon 0.50.26
squeezecenter 7.5.4.dfsg1-2
Could you please support me in upgrading to 2.4? Thanks a lot!!
Cheers!!
Code: Select all
DEBIAN_FRONTEND=noninteractive apt-get update DEBIAN_FRONTEND=noninteractive apt-get dist-upgrade
Hi,
When I trie this, i get the following message:
root@b3:~# DEBIAN_FRONTEND=noninteractive apt-get update
Hit http://b3.update.excito.org elvin/snapshots/2.3.0.2 Release.gpg
Ign http://b3.update.excito.org/ elvin/snapshots/2.3.0.2/main Translation-en
Hit http://b3.update.excito.org upstream_squeeze/snapshots/2.3.0.2 Release.gpg
Ign http://b3.update.excito.org/ upstream_squeeze/snapshots/2.3.0.2/main Transla tion-en
Hit http://b3.update.excito.org elvin/snapshots/2.3.0.2 Release
Hit http://b3.update.excito.org upstream_squeeze/snapshots/2.3.0.2 Release
Ign http://b3.update.excito.org elvin/snapshots/2.3.0.2/main armel Packages
Ign http://b3.update.excito.org upstream_squeeze/snapshots/2.3.0.2/main armel Pa ckages
Hit http://b3.update.excito.org elvin/snapshots/2.3.0.2/main armel Packages
Hit http://b3.update.excito.org upstream_squeeze/snapshots/2.3.0.2/main armel Pa ckages
Reading package lists... Done
W: Conflicting distribution: http://b3.update.excito.org elvin/snapshots/2.3.0.2 Release (expected elvin/snapshots but got elvin)
W: Conflicting distribution: http://b3.update.excito.org upstream_squeeze/snapsh ots/2.3.0.2 Release (expected upstream_squeeze/snapshots but got upstream_squeez e)
root@b3:~# DEBIAN_fRONTEND=noninteractive apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@b3:~#
Do you have any instructions for me?
Thanks,
Winston
The new kernel source is directly available now as a debian source package, i.e. if you enables sources in your apt-sources (change_distribution -s elvin && apt-get update), then you can issue "apt-get source bubba3-kernel" for the sources.Gordon wrote:About that being cryptic...
Thanks for confirming that there is in fact a new kernel. Can anyone please where / when the kernel source for this version will be available? For now I'll have to skip the update, how promising the improvements may seem.
From what I figured out, forked-daapd doesn't have a web-interface (Config file even says "# Admin password for the non-existent web interface"). I never really used the web-interface for mt-daapd because I found it never to be of any use.DanielM wrote: edit 2: Seems you forgot to ship the web interface in the deb... In /var/log/forked-daapd.log I get lots of the following:
Yes, that's the conclusion I came to as well after some more searching. Sorry for not stating it here.carl wrote:From what I figured out, forked-daapd doesn't have a web-interface (Config file even says "# Admin password for the non-existent web interface"). I never really used the web-interface for mt-daapd because I found it never to be of any use.DanielM wrote: edit 2: Seems you forgot to ship the web interface in the deb... In /var/log/forked-daapd.log I get lots of the following:
And is it to the file "/etc/apt/sources.list.d/excito.list" that I should add "deb-src http://b3.update.excito.org elvin main" or is there a better, more correct, place?carl wrote: The new kernel source is directly available now as a debian source package, i.e. if you enables sources in your apt-sources (change_distribution -s elvin && apt-get update), then you can issue "apt-get source bubba3-kernel" for the sources.
I just noticed that the "change_distribution" command didi was I was asking for, sorry.eramoli wrote:And is it to the file "/etc/apt/sources.list.d/excito.list" that I should add "deb-src http://b3.update.excito.org elvin main" or is there a better, more correct, place?carl wrote: The new kernel source is directly available now as a debian source package, i.e. if you enables sources in your apt-sources (change_distribution -s elvin && apt-get update), then you can issue "apt-get source bubba3-kernel" for the sources.
Is there a reason for not having it in there from the start?