New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !

[solved - source.list issue] open port/s for download?

Got problems with Bubba? Then this forum is for you.
Locked
newt
Posts: 25
Joined: 11 Sep 2007, 13:40

[solved - source.list issue] open port/s for download?

Post by newt »

Hi All,
After my update to 0.52.2.1 my bubba will not download any torrents. Do I have to open up ports in my firewall? A couple of days ago the ...2.2 was relased and I updated my Bubba with that and it looks that the update worked but still in the web-admin it says ...2.1 and it did not solve my problem with the torrent download.

I can't find any other post on this matter, and I have tyed to open 6890-6999 with out any changes. The http-download works fine since rTorrent loads the torrent file with out any problems (at least what I can see)
Last edited by newt on 27 May 2008, 14:42, edited 1 time in total.
newt
Posts: 25
Joined: 11 Sep 2007, 13:40

maybe not a port issue?

Post by newt »

hi all
have I made the wrong conclusion that it is not port related problem? has it to be to the updated firmware? have anybody else got this problem?
I'm thankful for all kind of hints to fix the torrent download.
johannes
Posts: 1470
Joined: 31 Dec 2006, 07:12
Location: Sweden
Contact:

Post by johannes »

Sounds very strange, and it doesn't have to do with opening ports.

Did you ever change the /etc/apt/sources.list file? If so, did you restore it before running the update?

Also try restarting Bubba to see if it helps.
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
GaryL
Posts: 87
Joined: 04 Sep 2007, 17:40
Location: Northern Ireland

Post by GaryL »

Port range 10000 to 14000 is the default range that needs to be forwarded to Bubba for downloading torrents.

I had a similar problem in regards to updating my firmware, but I reckon it was due to me not correcting my sources list, before running the update.

I ended up reinstalling bubba from scratch as I wasn't sure what else I could do.
newt
Posts: 25
Joined: 11 Sep 2007, 13:40

Post by newt »

Thank you for your replies!!!

when I looked at the source.list I noticed that somebody as change it... :roll:
and not changed it back... :oops:

what can I do now? 13.5 in user manual... and there is no way to save the data (with out copy it to another hd)?

I have tied to rebot, forward port 10000-14000, change back the source.list and then update Bubba whit out any luck or improvements on torrent downloads.
johannes
Posts: 1470
Joined: 31 Dec 2006, 07:12
Location: Sweden
Contact:

Post by johannes »

I don't think you should have to re-install your bubba, the problem should be possible to solve. Correct the sources.list and do:

apt-get update
apt-get dist-upgrade

and if it fails, please type the output here and we'll take it from there.

(And GaryL, it isn't neccessary to open any ports for downloading torrents to work, at least not for me. It may have impact on performance though. Anyone who can clarify this?)
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
GaryL
Posts: 87
Joined: 04 Sep 2007, 17:40
Location: Northern Ireland

Post by GaryL »

Ah Ok, to be honest I've never really tried downloading without the ports forwarded, might run a few tests out of curiosity.
I just thought I read somewhere that it had to be done.
newt
Posts: 25
Joined: 11 Sep 2007, 13:40

Post by newt »

Thank you Johannes it worked perfectly.
Locked