Hi , got a new 400G WD and switched the old one, to try the new version of OS, all was Ok and is working fine, but I got ONLY 10 Gb of HD instead of 400 or at list 350
Any idea ???
I will swap the disk to the old one, so no big deal, just want you to know.
Thanks,
paolol
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
ETC immage and HD Wd 400
If you are using the "light-image" you'll have to manually format the data-partition on the drive.
And then mount it.
You could also add this line to /etc/fstab to have it mounted automaticly at startup.
Code: Select all
mkfs.ext3 -L "Bubba home" /dev/hda2
tune2fs -c0 -i0 /dev/hda2
Code: Select all
mount /dev/hda2 /home
Code: Select all
/dev/hda2 /home ext3 noatime,defaults 0 2
Hi,
You should be able to get the size of the user partition by changing in the file "/usr/share/web-admin/index.php". There is a section where "disk_free_space" is called on the "/" partition. If you change this (and the corresponding disk_total_space") to "/home" you should get the correct user space available.
/PA
You should be able to get the size of the user partition by changing in the file "/usr/share/web-admin/index.php". There is a section where "disk_free_space" is called on the "/" partition. If you change this (and the corresponding disk_total_space") to "/home" you should get the correct user space available.
/PA