forum.excito.com

Posted: **13 Mar 2011, 09:34**

# i2cdetect 0
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0.
I will probe address range 0x03-0x77.
Continue? [Y/n] 
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- -- 
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
60: -- -- -- -- 64 -- -- -- -- -- -- -- -- -- -- -- 
70: -- -- -- -- -- -- -- --

Anybody know what this device is at address 0x64?

sensors-detect does not recognize it, and i cannot find any Linux i2c device driver which normally uses this address.

Posted: **10 May 2011, 02:48**

Are you on B3? Could it be the wifi card? There is nothing else connected on the I2C bus..

Posted: **10 May 2011, 03:25**

Hi Johannes

Yes, i'm on a B3.

WiFi? Is this the EEPROM containing the regulatory information?

Do you use a COTS card? Can you tell me what it is? Where i can get a data sheet?

Posted: **10 May 2011, 03:33**

Could be yes, I actually am not sure if those mini-PCI-x-cards we have use I2C, but it is specified in the connector and hence routed on the board to that connector.

The cards we use are Unex DXNA-92: http://www.unex.com.tw/product/dnxa-92

forum.excito.com

i2c devices

i2c devices

Re: i2c devices

Re: i2c devices

Re: i2c devices