The overlay can be found HERE
Content:
- bubba (version 2.6_pre150625)
A meta package for the Bubba OS on Gentoo. Installs bubba-buttond and bubba-frontend with all its dependencies - bubba-frontend (version 2.6_pre150707)
First beta of the bubba webinterface - bubba-buttond (version 1.4-r3)
A listener service for the power button on the B3 - enables graceful shutdown when the B3 can't be accessed over the net- in this revision the helper application write-magic is moved away from /sbin, but a symlink is provided if you do not have sysvinit-9999::bubba installed
- bubba-easyfind (version 2.6-r4)
The easyfind service - rewritten for current perl and to use the mybubba.org servers for updating your IP.- in this revision USE flags have been added to control what methods you want to install:
- dhcp : allows automatic renewal of your easyfind record when you receive a new IP
- remote-router : installs the easyfind service that periodically checks the IP of your router
Both options are enabled by default - edit package.use to disable
- in this revision USE flags have been added to control what methods you want to install:
- sysvinit (version 9999)
The sysvinit package patched to work with your B3. Allows you to use the normal shutdown and halt commands. Improved sanity check now prevents installation on other systems.- Changes towards the original version in the Gentoo tree is a revised /etc/inittab and /sbin/shutdown. If you use this on other systems you will have no console and it will only reboot instead of halt or power off
- Logitech Media Server (version 7.8.0)
For those that own Squeezebox devices - Domoticz (version 9999/rolling - check domoticz.com for actual current revision)
A home automation system - Openssl with cryptodev support (version 1.02_pre150212)
For those that feel adventurous or simply want to try. You'll need to accept keywords '**' for this version as it is experimental. More info on running this on a B3 can be found HERE - Cryptodev (version 1.6)
The accompanying build for openssl-1.02_pre150212 . For obvious reasons I've also set this one up to require you to accept keywords '**'.