[closed] Beta 2: Bubba web admin - build on Gentoo
Posted: 07 Jul 2015, 11:12
Fri 8 Jan 2016: I'm closing this thread as I'm entering the stage of Release Candidate
This is the second beta of the Bubba web admin running on Sakaki's Gentoo-on-B3. If you are running Gentoo based on the latest live USB release (1.8.0) you can install this by running the following command:
prerequisites
Known issues
This is the second beta of the Bubba web admin running on Sakaki's Gentoo-on-B3. If you are running Gentoo based on the latest live USB release (1.8.0) you can install this by running the following command:
Code: Select all
emerge -av bubba
- Your ebuild environment must have either USE flag 'apache2' or USE flag 'nginx' set
(i.e. one of them, not both) - With nginx you will need to manually edit your web-server config file to include ./vhosts.d/*
this is where I put the site definition file
Known issues
- if your wifi network adapter does not identify as wlan0, changing wifi settings will be disabled.
- Solution: add a udev rule to rename the wifi network adapter from wlp?s? to wlan0
- This is now handled in the 1.7.0 release of Sakaki's Live USB
- Solution: add a udev rule to rename the wifi network adapter from wlp?s? to wlan0
- If you change the network profile your whole network config will be overwritten. This is by design and will (re)set your lan interface to address 192.168.10.1
- The default network configuration on Sakaki's live USB editions have bridge interface br0 configured to be the lan interface, with only the wired adapter eth1 assigned to it. This may confuse the web admin if you own a B3 wifi, showing wifi as enabled but not working. If that is the case simply disable and the re-enable wifi through the web admin. The issue should correct itself this way.