New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !

Howto install bubba on RAID-1 array (system and data)

A collection of tips on howto tweak your Bubba.
Post Reply
MouettE
Site admin
Posts: 341
Joined: 06 Oct 2011, 19:45

Howto install bubba on RAID-1 array (system and data)

Post by MouettE »

Hello everyone,

I writed a first version of my experience in installing a bubba 2 software on RAID-1 arrays. The page is on the wiki at Install_Bubba_2_on_RAID-1_volumes. Feel free to check it out and correct/improve things !

Although it is possible to do the install without a serial console access, I would't recommend it. In case of failure the serial console is the only way to access u-boot environment, since the u-boot utils don't work in the rescue system (static binaries won't work, I guess that's because kernel in the rescue environment is too old).
janeks
Posts: 78
Joined: 15 Sep 2008, 02:02

Re: Howto install bubba on RAID-1 array (system and data)

Post by janeks »

The link is broken.
Are somewhere there alternative?
MouettE
Site admin
Posts: 341
Joined: 06 Oct 2011, 19:45

Re: Howto install bubba on RAID-1 array (system and data)

Post by MouettE »

janeks
Posts: 78
Joined: 15 Sep 2008, 02:02

Re: Howto install bubba on RAID-1 array (system and data)

Post by janeks »

Thank you! :)
Post Reply