New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !

Very slow Ftp-speed

Got problems with your B2 or B3? Share and get helped!
Post Reply
JanPihlgren
Posts: 26
Joined: 23 Mar 2009, 01:16

Very slow Ftp-speed

Post by JanPihlgren »

I'm using ftp to upload files to BubbaTwo.
For the moment there will take about 2 and a half hour until the work finish.
The same amount of files ftp:ed to a NAS took less than 1 minute.
I alwas have that slow transmission when using ftp to BubbaTwo.
Why?

Edit:
It lookslike that the speed is only 9.2 kB/s. And that in a network with at least 10 MB/s
johannes
Posts: 1470
Joined: 31 Dec 2006, 07:12
Location: Sweden
Contact:

Re: Very slow Ftp-speed

Post by johannes »

This is strange, did you get it solved?
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
ctc
Posts: 4
Joined: 29 Dec 2009, 17:31

Re: Very slow Ftp-speed

Post by ctc »

I have a new Bubba 2 and have also a very slow ftp connection. I run the Bubba as a server only (no WAN connection) and access it from within my LAN.

I connect using Windows explorer to ftp://bubba and it takes 60 seconds to log on. To change directory takes 30 seconds. Strange?
JanPihlgren
Posts: 26
Joined: 23 Mar 2009, 01:16

Re: Very slow Ftp-speed

Post by JanPihlgren »

No, I havn't solved the problem.
In fact at that transmission toke 12 hours for 2500 files with a total of 98M
I also saw that the speed get down to 1.2 kB/s. Maybee it has to do with the smal amount of RAM.
I can mention that there was no other trafic to and from the Bubba.
asparak
Posts: 173
Joined: 08 Jun 2009, 07:38

Re: Very slow Ftp-speed

Post by asparak »

What version of Bubba 2 software are you on? Network speeds have been reported as a bit odd for a lot of people and I fixed it by using a kernel off the unstable repo, but I don't recommend that for everyone.

Is it just ftp or is it networking in general?
Is it just slow to one host or several different hosts?
JanPihlgren
Posts: 26
Joined: 23 Mar 2009, 01:16

Re: Very slow Ftp-speed

Post by JanPihlgren »

The version is 1.1.4 as I can find.
And it looks like that it is only ftp which is slow.
Download seems too have reasonable speed.
asparak
Posts: 173
Joined: 08 Jun 2009, 07:38

Re: Very slow Ftp-speed

Post by asparak »

Try upgrading to 1.2.4, which is the latest version
JanPihlgren
Posts: 26
Joined: 23 Mar 2009, 01:16

Re: Very slow Ftp-speed

Post by JanPihlgren »

Yes, now I havw upgraded to 1.2.4
I tested a ftp-transmission with 6 files with total of 8.3 MB
Transmissionspeed not more than 65 kB/s and toke about 2 minutes.
I feel it will run a little faster, but ....
During the transfer there was a couple of interups, the transmission halted for a while and than continued.

When I access bubba with ftp or ssh bubba respods very slowly, it takes a couple of seconds befor I get any respons.
But when I get respons with ssh it work with reasonable speed.
johannes
Posts: 1470
Joined: 31 Dec 2006, 07:12
Location: Sweden
Contact:

Re: Very slow Ftp-speed

Post by johannes »

Strange, it seems either that your Bubba's CPU is heavily loaded for some reason, or that something is fishy with your network. For instance I have seen similar problems when I happened to connect two cables between my switch and my router, for some reason the EOL didn't seem to work and the network was practically killed due to the circulating traffic.

The fact that only FTP shows this performance is strange though. What FTP client do you use? Can you try to switch to passive mode, just to check? Is the speed constantly low, or does it start higher, to slow down later on in the transmission?
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
JanPihlgren
Posts: 26
Joined: 23 Mar 2009, 01:16

Re: Very slow Ftp-speed

Post by JanPihlgren »

I use gFTP from my desktop.
The speed decrease.
Transmission between other hosts works with normal speed so I don't think the problem have to do with the network.
The problem have to be with bubba because the speedproblem occurs only with bubba.
johannes
Posts: 1470
Joined: 31 Dec 2006, 07:12
Location: Sweden
Contact:

Re: Very slow Ftp-speed

Post by johannes »

Hi again,

To be able to dig deeper into this we would need to know the age and batch number of your board. This can be done in two ways, either you open the board and read the revision and label serial number, or you give me your board MAC adress and I can check in our production database. The MAC can be checked either from your router's DHCP server log (if you have any), or through one of the following options:

- reboot your bubba two and log in to the web UI as admin. Go to settings->logs and show the syslog. Copy and paste the entire contents and send to us (preferrably to support@excito.com). While you are at it, please send the FTP log as well.

..or:
- log in with ssh, become root (su / excito) and type 'ifconfig' on the command line. Send the output to us.

Thanks again. We'll do what we can to make this work for you.

Best Regards,
/Johannes, Excito
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
JanPihlgren
Posts: 26
Joined: 23 Mar 2009, 01:16

Re: Very slow Ftp-speed

Post by JanPihlgren »

Here is the output:
bubba:/home/jan# ifconfig
eth0 Link encap:Ethernet HWaddr 00:22:02:00:03:B0
UP BROADCAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:328 (328.0 b)
Base address:0x8000

eth1 Link encap:Ethernet HWaddr 00:22:02:00:03:B1
inet addr:192.168.0.82 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::222:2ff:fe00:3b1/64 Scope:Link
UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1
RX packets:111631863 errors:0 dropped:0 overruns:0 frame:0
TX packets:6896678 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2512408629 (2.3 GiB) TX bytes:1391122960 (1.2 GiB)
Base address:0xa000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:347 errors:0 dropped:0 overruns:0 frame:0
TX packets:347 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:56820 (55.4 KiB) TX bytes:56820 (55.4 KiB)
Post Reply