New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !

Bubba reboots

Got problems with your B2 or B3? Share and get helped!
Post Reply
citro
Posts: 7
Joined: 19 Oct 2009, 11:33

Bubba reboots

Post by citro »

Hi

My bubba has started to reboot itself a day or so ago. I had uptime for over 50 days with no problem. Rtorrent has been running since day 0 with lots of torrent and traffic but no problems until now. In which log do I look for errors?
carl
Posts: 474
Joined: 07 May 2008, 04:41

Re: Bubba reboots

Post by carl »

citro wrote:Hi

My bubba has started to reboot itself a day or so ago. I had uptime for over 50 days with no problem. Rtorrent has been running since day 0 with lots of torrent and traffic but no problems until now. In which log do I look for errors?
You can look for errors in /var/log/syslog usually.
/Carl Fürstenberg, Excito Software Developer
http://www.excito.com
support@excito.com
citro
Posts: 7
Joined: 19 Oct 2009, 11:33

Re: Bubba reboots

Post by citro »

Ok it looks like it restarted around this time. Here is some of the syslog from that time.
Restarted 15:42:23 dont know why though?

Code: Select all

Jan 3 15:43:51 bubba dnsmasq[2322]: DHCPREQUEST(eth1) 192.168.10.83 00:19:1d:df:b4:c8
Jan 3 15:43:51 bubba dnsmasq[2322]: DHCPACK(eth1) 192.168.10.83 00:19:1d:df:b4:c8 Wii
Jan 3 15:44:54 bubba dhclient: DHCPREQUEST on eth0 to 10.125.3.11 port 67
Jan 3 15:44:54 bubba dhclient: DHCPACK from 10.125.3.11
Jan 3 15:44:55 bubba logger: Update firewall WAN address.
Jan 3 15:44:55 bubba logger: Activate updated firewall config.
Jan 3 15:44:56 bubba dhclient: bound to 83.252.19.232 -- renewal in 1686 seconds.
Jan 3 15:45:01 bubba /USR/SBIN/CRON[19339]: (root) CMD (test -x /usr/bin/php && /usr/bin/php /usr/share/horde3/scripts/alarms.php)
Jan 3 15:45:07 bubba dnsmasq[2322]: reading /etc/resolv.conf
Jan 3 15:45:07 bubba dnsmasq[2322]: using nameserver 83.255.245.11#53
Jan 3 15:45:07 bubba dnsmasq[2322]: using nameserver 193.150.193.150#53
Jan 3 15:45:51 bubba dnsmasq[2322]: DHCPREQUEST(eth1) 192.168.10.83 00:19:1d:df:b4:c8
Jan 3 15:45:51 bubba dnsmasq[2322]: DHCPACK(eth1) 192.168.10.83 00:19:1d:df:b4:c8 Wii
Jan 3 15:46:08 bubba dnsmasq[2322]: DHCPREQUEST(eth1) 192.168.10.83 00:19:1d:df:b4:c8
Jan 3 15:46:08 bubba dnsmasq[2322]: DHCPACK(eth1) 192.168.10.83 00:19:1d:df:b4:c8 Wii
Jan 3 15:47:51 bubba dnsmasq[2322]: DHCPREQUEST(eth1) 192.168.10.83 00:19:1d:df:b4:c8
Jan 3 15:47:51 bubba dnsmasq[2322]: DHCPACK(eth1) 192.168.10.83 00:19:1d:df:b4:c8 Wii
Jan 3 15:42:23 bubba syslogd 1.4.1#18: restart.
Jan 3 15:42:23 bubba kernel: klogd 1.4.1#18, log source = /proc/kmsg started.
Jan 3 15:42:23 bubba kernel: Using MPC831x RDB machine description
Jan 3 15:42:23 bubba kernel: Linux version 2.6.26.5 (tor@sid) (gcc version 4.3.2 (GCC) ) #3 Thu Aug 6 14:46:56 CEST 2009
Jan 3 15:42:23 bubba kernel: Found legacy serial port 0 for /soc8313@e0000000/serial@4500
Jan 3 15:42:24 bubba kernel: mem=e0004500, taddr=e0004500, irq=0, clk=133333334, speed=0
Jan 3 15:42:24 bubba kernel: Found legacy serial port 1 for /soc8313@e0000000/serial@4600
Jan 3 15:42:24 bubba kernel: mem=e0004600, taddr=e0004600, irq=0, clk=133333334, speed=0
Jan 3 15:42:24 bubba kernel: console [udbg0] enabled
Jan 3 15:42:24 bubba kernel: Entering add_active_range(0, 0, 65536) 0 entries of 256 used
Jan 3 15:42:24 bubba kernel: Found MPC83xx PCI host bridge at 0x00000000e0008500. Firmware bus number: 0->0
Jan 3 15:42:24 bubba kernel: PCI host bridge /soc8313@e0000000/pci@8500 (primary) ranges:
Jan 3 15:42:24 bubba kernel: Top of RAM: 0x10000000, Total RAM: 0x10000000
Jan 3 15:42:24 bubba kernel: Memory hole size: 0MB
Jan 3 15:42:24 bubba kernel: Zone PFN ranges:
Jan 3 15:42:24 bubba kernel: DMA 0 -> 65536
Jan 3 15:42:24 bubba kernel: Normal 65536 -> 65536
Jan 3 15:42:24 bubba kernel: Movable zone start PFN for each node
Jan 3 15:42:24 bubba kernel: early_node_map[1] active PFN ranges
Jan 3 15:42:24 bubba kernel: 0: 0 -> 65536
Jan 3 15:42:24 bubba kernel: On node 0 totalpages: 65536
Jan 3 15:42:24 bubba kernel: DMA zone: 512 pages used for memmap
Jan 3 15:42:24 bubba kernel: DMA zone: 0 pages reserved
Jan 3 15:42:24 bubba kernel: DMA zone: 65024 pages, LIFO batch:15
Jan 3 15:42:24 bubba kernel: Normal zone: 0 pages used for memmap
Jan 3 15:42:24 bubba kernel: Movable zone: 0 pages used for memmap
Jan 3 15:42:24 bubba kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Jan 3 15:42:24 bubba kernel: Kernel command line: root=/dev/sda1 console=ttyS0,115200 serial=760 key=9J7d41hoz69GO02QijtRokYw9O8=
Jan 3 15:42:24 bubba kernel: IPIC (128 IRQ sources) at fdffa700
Jan 3 15:42:24 bubba kernel: PID hash table entries: 1024 (order: 10, 4096 bytes)
Jan 3 15:42:24 bubba kernel: time_init: decrementer frequency = 33.333333 MHz
Jan 3 15:42:24 bubba kernel: time_init: processor frequency = 333.333335 MHz
Jan 3 15:42:24 bubba kernel: clocksource: timebase mult[7800001] shift[22] registered
Jan 3 15:42:24 bubba kernel: clockevent: decrementer mult[888] shift[16] cpu[0]
Jan 3 15:42:24 bubba kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 3 15:42:24 bubba kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan 3 15:42:24 bubba kernel: Memory: 255932k/262144k available (3384k kernel code, 5912k reserved, 124k data, 100k bss, 168k init)
Jan 3 15:42:24 bubba kernel: Calibrating delay loop... 66.56 BogoMIPS (lpj=133120)
Jan 3 15:42:24 bubba kernel: Mount-cache hash table entries: 512
Jan 3 15:42:24 bubba kernel: net_namespace: 624 bytes
Jan 3 15:42:24 bubba kernel: NET: Registered protocol family 16
Jan 3 15:42:24 bubba kernel: PCI: Probing PCI hardware
Jan 3 15:42:24 bubba kernel: Memory resource not set for host bridge 0
Jan 3 15:42:24 bubba kernel: Registering ipic with sysfs...
Jan 3 15:42:24 bubba kernel: SCSI subsystem initialized
Jan 3 15:42:24 bubba kernel: libata version 3.00 loaded.
Jan 3 15:42:24 bubba kernel: usbcore: registered new interface driver usbfs
Jan 3 15:42:24 bubba kernel: usbcore: registered new interface driver hub
Jan 3 15:42:24 bubba kernel: usbcore: registered new device driver usb
Jan 3 15:42:24 bubba kernel: Switched to high resolution mode on CPU 0
johannes
Posts: 1470
Joined: 31 Dec 2006, 07:12
Location: Sweden
Contact:

Re: Bubba reboots

Post by johannes »

Strange. Could it be anything that happens with your power supply? Only a short power-outage (short blink on the lights) could cause this.
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
citro
Posts: 7
Joined: 19 Oct 2009, 11:33

Re: Bubba reboots

Post by citro »

Could be , havent noticed anything else rebooting due to power loss. Seems to be some problem with this old build of rtorrent, any chance the you guys could include a newer in the respitorys? Have looked in the unstable but still rtorrent 0,79.
johannes
Posts: 1470
Joined: 31 Dec 2006, 07:12
Location: Sweden
Contact:

Re: Bubba reboots

Post by johannes »

Ah. We don't have any newer version planned right now (have other high priority tasks in our pipeline), so this will have to wait a bit. I hope you find the solution, and if not, just get back to us..
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
Post Reply