First post/problem description-B2 does not work as intended
Posted: 14 Oct 2011, 14:53
Hej
jag har lite av ett problem. Jag skaffade mig en B2 för ett tag sedan då min router gav upp och jag tänkte att det var en helt perfekt liten maskin som skulle kunna ersätta både routern och den lilla filservern som jag hade. Tyvärr så visar det sig att jag inte kunde använda mig av bubba på det viset som jag hade tänkt.
Meningen var ju att min Bubba 2 skulle ersätta både min filserver, router och brandvägg. Men trots att detta är just vad den skulle kunna göra så kan jag inte se filmer från den på min ATV2 utan att det blir stora problem med buffring 2-8 gånger under en film. Jag kan inte heller surfa och samtidigt föra över filer till den, det går ett tag eller om filerna inte är allt för stora, men att föra över ett par GB av data går oftast helt enkelt inte.
Jag erkänner att jag inte är mycket av en linux användare eller någon form av power-user. jag har ingen större erfarenhet av att arbeta med command-line interface. Men jag fick känslan av att med en Bubba så skulle man inte behöva tweaka så väldigt mycket.
Nu till mina frågor.
Är det jag har skrivit ovan kända brister och fel som har drabbat andra användare eller är det min okunskap som är boven i dramat, om fler har drabbats av detta, finns det något enket sätt att avhjälpa detta?
Tycker ni forumanvändare att jag hade för höga förhoppningar på min Bubba?
/Boriz
---
Hi
I have a bit of a problem. I got a B2 a while ago when my router gave up and I thought it was a perfect little machine that could replace both the router and the small file server that I had. Unfortunately, it turns out that I could not use my bubba on the way that I had thought.
The idea was that my Bubba 2 would replace both my file server, router and firewall. But even though this is precisely what it should be able to do,I can't watch movies from it on my ATV2 without it turning into problems with buffering sorta like 2-8 times during a movie. I can't surf while transferring files to it or transfer large files to it, it works for a while if the files arent too large, but to transfer a couple of GB of data is simply impossible most of the time.
I admit that I'm not much of a Linux user, or some form of power-user. I have little experience of working with command-line interface. But I got the feeling that with a Bubba there would be no need to tweak it a lot.
Now to my questions.
Is what I have written above known shortcomings and errors that have occurred to other users or it is my ignorance that is the culprit, if more people have been affected by this, is there any simple way to remedy this?
Do you forum users think that I had to high hopes for my Bubba?
/Boriz
jag har lite av ett problem. Jag skaffade mig en B2 för ett tag sedan då min router gav upp och jag tänkte att det var en helt perfekt liten maskin som skulle kunna ersätta både routern och den lilla filservern som jag hade. Tyvärr så visar det sig att jag inte kunde använda mig av bubba på det viset som jag hade tänkt.
Meningen var ju att min Bubba 2 skulle ersätta både min filserver, router och brandvägg. Men trots att detta är just vad den skulle kunna göra så kan jag inte se filmer från den på min ATV2 utan att det blir stora problem med buffring 2-8 gånger under en film. Jag kan inte heller surfa och samtidigt föra över filer till den, det går ett tag eller om filerna inte är allt för stora, men att föra över ett par GB av data går oftast helt enkelt inte.
Jag erkänner att jag inte är mycket av en linux användare eller någon form av power-user. jag har ingen större erfarenhet av att arbeta med command-line interface. Men jag fick känslan av att med en Bubba så skulle man inte behöva tweaka så väldigt mycket.
Nu till mina frågor.
Är det jag har skrivit ovan kända brister och fel som har drabbat andra användare eller är det min okunskap som är boven i dramat, om fler har drabbats av detta, finns det något enket sätt att avhjälpa detta?
Tycker ni forumanvändare att jag hade för höga förhoppningar på min Bubba?
/Boriz
---
Hi
I have a bit of a problem. I got a B2 a while ago when my router gave up and I thought it was a perfect little machine that could replace both the router and the small file server that I had. Unfortunately, it turns out that I could not use my bubba on the way that I had thought.
The idea was that my Bubba 2 would replace both my file server, router and firewall. But even though this is precisely what it should be able to do,I can't watch movies from it on my ATV2 without it turning into problems with buffering sorta like 2-8 times during a movie. I can't surf while transferring files to it or transfer large files to it, it works for a while if the files arent too large, but to transfer a couple of GB of data is simply impossible most of the time.
I admit that I'm not much of a Linux user, or some form of power-user. I have little experience of working with command-line interface. But I got the feeling that with a Bubba there would be no need to tweak it a lot.
Now to my questions.
Is what I have written above known shortcomings and errors that have occurred to other users or it is my ignorance that is the culprit, if more people have been affected by this, is there any simple way to remedy this?
Do you forum users think that I had to high hopes for my Bubba?
/Boriz