Hi,
small question, i tried to get the rescue system working..but..it doesnt work.
I dont know why.
Device except the usb stick and boot, but the b3 boots in the real os.
Any idea how i can fix it?
Thanks
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Rescue system does not work
Re: Rescue system does not work
Hold the little button on the back while sticking the power supply into the b3
-
- Posts: 21
- Joined: 12 Jun 2014, 17:00
Re: Rescue system does not work
Thanks for your tip, but this is what i did
Wait till led is green, then the led went to purpel after a while...but then it turned to blue an the orginal OS is loading...
Wait till led is green, then the led went to purpel after a while...but then it turned to blue an the orginal OS is loading...
Re: Rescue system does not work
In that case my guess would be you did not set up your USB stick as you should have. The USB stick should have a folder named 'install' in the root. Can you verify this?
http://wiki.excito.org/wiki/index.php/R ... ubba2_/_B3
http://wiki.excito.org/wiki/index.php/R ... ubba2_/_B3
-
- Posts: 21
- Joined: 12 Jun 2014, 17:00
Re: Rescue system does not work
Hi,
found the error.
It was the usb stick..
found the error.
It was the usb stick..
Re: Rescue system does not work
Hi guys, I've exactly the same problem. Can't remember my login name for my personal acount nor for the admin. I also can't connect through the ssh-client since the login is refused.
So currently I'm trying to reinstall the os in order to reset all the login information and start over.
Put the folder named 'install' on top of the memory stick, formated it first in fat32, and followed the instruction as shown in the manual. Unfortunately I'm not able to say if the memory stick has a partition table.
Nor I'm able to take another one since I have only this one
So switchgott, what did you did differently that it worked?
regards
I'm sorry for the circumstances, but the problem is now also solved for me A friend of mine gave spontaneously an other memory stick. So the problem was the missing partition table i guess
So currently I'm trying to reinstall the os in order to reset all the login information and start over.
Put the folder named 'install' on top of the memory stick, formated it first in fat32, and followed the instruction as shown in the manual. Unfortunately I'm not able to say if the memory stick has a partition table.
Nor I'm able to take another one since I have only this one
So switchgott, what did you did differently that it worked?
regards
I'm sorry for the circumstances, but the problem is now also solved for me A friend of mine gave spontaneously an other memory stick. So the problem was the missing partition table i guess