B2 reloading u-boot

Got problems with your B2 or B3? Share and get helped!
Post Reply
Mike
Posts: 1
Joined: 24 Jan 2016, 17:02

B2 reloading u-boot

Post by Mike » 24 Jan 2016, 17:08

Hello all,

I've managed to install a bad u-boot version or destroyed the existing one.

Attached via serial I get no output from the B2 at all. Anyone know how to restore to flash without a serial console? There has to be some way that this was originally flashed to the board.

Pointers to any docs or suggestions are more than welcome...

Mike

Post Reply