New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
B2 and Easyfind
B2 and Easyfind
For the last week or so I have been having a problem with Easyfind.
My Easyfind address is set to: http://testb2.myownb2.com (I have changed this earlier today), but when I input this into a browser I don't connect to my B2:
Doing an nslookup seems to indicate Easyfind is set up correctly:
Connecting directly using my IP address does work though, so the issue is not with my network or my B2.
I have tried this on my work PC and on my mobile phone (using 3G), with the same result on both.
My Easyfind address is set to: http://testb2.myownb2.com (I have changed this earlier today), but when I input this into a browser I don't connect to my B2:
Doing an nslookup seems to indicate Easyfind is set up correctly:
Connecting directly using my IP address does work though, so the issue is not with my network or my B2.
I have tried this on my work PC and on my mobile phone (using 3G), with the same result on both.
Re: B2 and Easyfind
This could be if your router is blocking traffic from the outside. Are you sure you forwarded port 80 in your router?
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
Re: B2 and Easyfind
Hi Johannes,
I have forwarded port 80 in my router.
When I try http://testb2.myownb2.com, this doesn't work, but when I use my actual IP address, i.e. http://87.112.###.### (I'd rather not divulge this to everyone), this does work.
I get the same result on my work PC and on my mobile phone (using mobile network, not work network).
Any further ideas?
I have forwarded port 80 in my router.
When I try http://testb2.myownb2.com, this doesn't work, but when I use my actual IP address, i.e. http://87.112.###.### (I'd rather not divulge this to everyone), this does work.
I get the same result on my work PC and on my mobile phone (using mobile network, not work network).
Any further ideas?
Re: B2 and Easyfind
Ok, but test2.mywonb2.com does not point to that IP, it points to another IP: 31.185.xyz.xyz. So obviously yoru B2 has not for some reason told our servers you are on a new IP, could that be it? If you disable and then re-enalbe the easyfind service (go to admin -> settings -> identity in the web settings), does this help?
[Edit: keyslip correction]
[Edit: keyslip correction]
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
Re: B2 and Easyfind
I have disabled and re-enalbed the easyfind service, and this now works. Thanks for that.
Having done a little digging, the IP address 31.185.xyz.xyz was assigned to my network from 21/08/2012 @ 02:15, this changed to 87.112.xyz.xyz on 26/08/2012 @ 00:15, which is currently my IP address.
Having set up http://testb2.myownb2.com only yesterday (28/08/2012), how did Easyfind manage to pick up the previous IP address,31.185.xyz.xyz, and not the current one, 87.112.xyz.xyz?
Having done a little digging, the IP address 31.185.xyz.xyz was assigned to my network from 21/08/2012 @ 02:15, this changed to 87.112.xyz.xyz on 26/08/2012 @ 00:15, which is currently my IP address.
Having set up http://testb2.myownb2.com only yesterday (28/08/2012), how did Easyfind manage to pick up the previous IP address,31.185.xyz.xyz, and not the current one, 87.112.xyz.xyz?
Re: B2 and Easyfind
Then I know the issue. Since you have your B2 behind another router, the B2 does not currently detect changes in WAN IP. The Easyfind "change-IP trigger" functionality uses three signals; 1) changing IP on WAN-port (which you have disconnected), or 2) UPnP-IDG broadcast of new WAN IP from your router (which it obviously does not do, perhaps it's disabled?) or 3) reboot or network re-start.
Since this is a somewhat common problem for our customers, especially in some countries where ISP's have started handing out new IP's very often (up to hourly), we are now re-designing this feature so that the b2/b3 regularly will poll for a WAN IP change. This change will be released in the 2.5.1 update which is in testing phase now, and will hopefully release within weeks.
Sorry about your troubles.
Since this is a somewhat common problem for our customers, especially in some countries where ISP's have started handing out new IP's very often (up to hourly), we are now re-designing this feature so that the b2/b3 regularly will poll for a WAN IP change. This change will be released in the 2.5.1 update which is in testing phase now, and will hopefully release within weeks.
Sorry about your troubles.
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
Re: B2 and Easyfind
Please make it configurable, as my IP seldom changes, I don't need constant polling...johannes wrote:we are now re-designing this feature so that the b2/b3 regularly will poll for a WAN IP change.
Re: B2 and Easyfind
That's brilliant. Look forward to the new changes.
2) I believe I have UPnP switched on, but don't know much about this. I'll look into it.
3) This happens very rarely.
In the mean time, is there a way to trigger the Easyfind IP-change functionality via the command line on Bubba?
I have a script running to check for IP address change already, so could add this in if available.
Thanks.
1) My WAN-port is disconnected, that is correct.johannes wrote:The Easyfind "change-IP trigger" functionality uses three signals; 1) changing IP on WAN-port (which you have disconnected), or 2) UPnP-IDG broadcast of new WAN IP from your router (which it obviously does not do, perhaps it's disabled?) or 3) reboot or network re-start.
2) I believe I have UPnP switched on, but don't know much about this. I'll look into it.
3) This happens very rarely.
In the mean time, is there a way to trigger the Easyfind IP-change functionality via the command line on Bubba?
I have a script running to check for IP address change already, so could add this in if available.
Thanks.
Re: B2 and Easyfind
+1 (i've got a fixed IP)Please make it configurable, as my IP seldom changes, I don't need constant polling...
Martijn
Re: B2 and Easyfind
OF course, it's possible to configure for people who can handle the command line. As you understand, polling is the last resort after trying all other options, we don't like it either. Now when UPnP-IGD is turned off by default in new routers and ISP's decreasing the IP update (hours in some places), we don't really have a choice.
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
Re: B2 and Easyfind
OF course, it's possible to configure for people who can handle the command line. As you understand, polling is the last resort after trying all other options, we don't like it either. Now when UPnP-IGD is turned off by default in new routers and ISP's decreasing the IP update (hours in some places), we don't really have a choice.
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
Re: B2 and Easyfind
This is all I can find for UPnP settings in my router (Netgear WNR1000v3)
Is there a command line function I can use to refresh the Easyfind IP address?
Is there a command line function I can use to refresh the Easyfind IP address?
Re: B2 and Easyfind
Sorry, missed that question the first time. Yes, you can run /usr/lib/web-admin/easyfind.pl when you need it to update.
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
Re: B2 and Easyfind
Just tried this and it works perfectly.
Thanks.
Thanks.