I have a B3 working for some years as backup-raid working perfectly with my Mac.
Because I'm just setting up my system anew and the two 2TB in the B3 where nearly filled up, I decided to upgrade to 6TB with two WD-Red.
But I can't get my B3 work again. Put the unpacked image 2.4.1.1 on a 1GB USB and start the B3. It starts up the disk and everything seems to run perfect. Looks like hard-disk is formatted, HD-light inside blinking ...
But after 20 Minutes the whole thing stops. Light on B3 changes from green to blinking rose
![Sad :(](./images/smilies/icon_e_sad.gif)
Started several times new but always same result.
Anyone has an Idea what I can do!?
Tried to make a startup USB with one of the newer buildings from the forum here, but I was not able to copy it to the USB. It's not possible to copy the image to the Stick in Finder, always get the message file to big for the medium to copy to ... Even when file is 8GB and USB is 64GB!
Any help is much appreciated
![Smile :)](./images/smilies/icon_e_smile.gif)
Johannes