New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
[IMPLEMENTED] Need for authenticated SMTP for bubba....
[IMPLEMENTED] Need for authenticated SMTP for bubba....
Hi,
as far as I understand, I have 2 options for sending email from bubba:
1) send from bubba as smtp server
2) send through my ISPs smtp server
Both won't work in many occasions ...
regarding option 1)
- at least the largest german freemailers don't accept emails from smtp servers with dynamic IP adresses (web.de, gmx,de, t-online.de). For an example, click here
regarding option 2)
- ISPs either don't have an SMTP, or don't allow to relay other than the email adress assigned by the ISPs (usually only a few use their emailsystems, as it makes it difficult to switch to another provider)
Either I have missed it, but what would be needed is an SMTP server entry, where I can also can enter my userID and my password. So far I could only find the field for the stmp server without any more details to add.
Could this be done in a next release or would I need to edit files manually? Which ones?
regards
dsp
Its now implemented in the 0.52.1 firmware release Thanks a lot!
as far as I understand, I have 2 options for sending email from bubba:
1) send from bubba as smtp server
2) send through my ISPs smtp server
Both won't work in many occasions ...
regarding option 1)
- at least the largest german freemailers don't accept emails from smtp servers with dynamic IP adresses (web.de, gmx,de, t-online.de). For an example, click here
regarding option 2)
- ISPs either don't have an SMTP, or don't allow to relay other than the email adress assigned by the ISPs (usually only a few use their emailsystems, as it makes it difficult to switch to another provider)
Either I have missed it, but what would be needed is an SMTP server entry, where I can also can enter my userID and my password. So far I could only find the field for the stmp server without any more details to add.
Could this be done in a next release or would I need to edit files manually? Which ones?
regards
dsp
Its now implemented in the 0.52.1 firmware release Thanks a lot!
Last edited by dsp76 on 09 Feb 2008, 04:58, edited 1 time in total.
Adding authenticated smtp is on our todo. Unfortunately it is a bit down on the list ![Sad :(](./images/smilies/icon_e_sad.gif)
if you feel adventurous you can however try to do it manually. Note, this is not tested by Excito yet.
First of you need to install the postfix-tls package. After that you need to modify your /etc/postfix/main.cf Add the lines:
Then you have to create the password file, /etc/postfix/saslpw, and add your passwords to that. The format should be:Where smtp.myisp.com matches what you have put in the SMTP server field in the web-admin UI.
/Tor
![Sad :(](./images/smilies/icon_e_sad.gif)
if you feel adventurous you can however try to do it manually. Note, this is not tested by Excito yet.
First of you need to install the postfix-tls package. After that you need to modify your /etc/postfix/main.cf Add the lines:
Code: Select all
smtp_sasl_auth_enable = yes
smtp_sasl_security_options =
smtp_sasl_password_maps = hash:/etc/postfix/saslpw
Code: Select all
smtp.myisp.com myuserid:mypw
/Tor
Co-founder OpenProducts and Ex Excito Developer
vote to raise priority on authenticated SMTP
Not being the adventurous type, I'd like to register my vote for high priority on this feature as a standard feature.
Thanks,
- Damir
Thanks,
- Damir
I'd like to second (third?) this request.
I tried to do install the postfix-tls package, but no luck. Of course, I have a rather limited linux skill-set, but still am willing to RTM and google.
I may be in the wrong, but it seems many ISPs are requiring authentication. Also, this (email server...) is one of the key features that differentiated Bubba (at least for me) from a lot of NAS boxes.
Thanks.
-kv
I tried to do install the postfix-tls package, but no luck. Of course, I have a rather limited linux skill-set, but still am willing to RTM and google.
I may be in the wrong, but it seems many ISPs are requiring authentication. Also, this (email server...) is one of the key features that differentiated Bubba (at least for me) from a lot of NAS boxes.
Thanks.
-kv
Kaveman,
You might not need to install the tls-package. We have reports on it working without that. So try just modify the files as stated above.
(We will try to squeeze this feature in to the next release since it is quite essential.)
/Tor
You might not need to install the tls-package. We have reports on it working without that. So try just modify the files as stated above.
(We will try to squeeze this feature in to the next release since it is quite essential.)
/Tor
Co-founder OpenProducts and Ex Excito Developer
Hi,
just want to confirm, that its working on bubba. Postfix-TLS could be installed from the Debian sources, however you also need to install:![Smile :-)](./images/smilies/icon_e_smile.gif)
dsp76
I would suggest to start an excito Wiki, similiar to ubuntuusers.de Wiki... too much good information gets spread over many messages in many threads....
just want to confirm, that its working on bubba. Postfix-TLS could be installed from the Debian sources, however you also need to install:
After all the changes to main.cf and the creation of /etc/postfix/saslpw you need to:apt-get install libsasl2-modules
Now its working fine1.) postmap saslpw
2.) /etc/init.d/postfix restart
![Smile :-)](./images/smilies/icon_e_smile.gif)
dsp76
I would suggest to start an excito Wiki, similiar to ubuntuusers.de Wiki... too much good information gets spread over many messages in many threads....
Hi dsp76,
Regarding the wiki we have thought of that. But since keeping it clean of spam etc we decided not to for the time being. We however strongly encourage anyone to add to our Howto forum![Wink ;)](./images/smilies/icon_e_wink.gif)
/Tor
Regarding the wiki we have thought of that. But since keeping it clean of spam etc we decided not to for the time being. We however strongly encourage anyone to add to our Howto forum
![Wink ;)](./images/smilies/icon_e_wink.gif)
/Tor
Co-founder OpenProducts and Ex Excito Developer
How do I set up postfix to use port 587 for outbound SMTP?
Thanks for the info on setting up psotfix for authenticated SMTP. My ISP uses port 587 for the initial connection.
How do I set this up in postfix? Do I add ':587' to the smtp server entry in the admin email setup, or do I need to add this to one of the postfix config files? If so which one?
Thanks!
How do I set this up in postfix? Do I add ':587' to the smtp server entry in the admin email setup, or do I need to add this to one of the postfix config files? If so which one?
Thanks!
Hi
Just FYI and the remote case developers did not know this. it may be a good idea to use the dovecot SASL libs. This means you do not need to add new users via shell but it uses dovecots database. As this requires a recompile of postfix this probably is only useful for new upgrades...
http://www.postfix.org/SASL_README.html#build_dovecot
Ubi
Just FYI and the remote case developers did not know this. it may be a good idea to use the dovecot SASL libs. This means you do not need to add new users via shell but it uses dovecots database. As this requires a recompile of postfix this probably is only useful for new upgrades...
http://www.postfix.org/SASL_README.html#build_dovecot
Ubi
Authentication
Hi
found a great link to setup authentication and also use TLS (gmail.com)
http://souptonuts.sourceforge.net/postfix_tutorial.html
Have not yet tried the TLS option, but found it usefull to get the authentication working. The /var/log/mail.log said that my ISP smtp server accepted the message... but it never arrived.
These variations did the trick for me
/etc/postfix/main.cf/etc/postfix/sasl_passwd
then run postmap and restart postfix
found a great link to setup authentication and also use TLS (gmail.com)
http://souptonuts.sourceforge.net/postfix_tutorial.html
Have not yet tried the TLS option, but found it usefull to get the authentication working. The /var/log/mail.log said that my ISP smtp server accepted the message... but it never arrived.
These variations did the trick for me
/etc/postfix/main.cf
Code: Select all
relayhost = [smtp.xmsnet.nl]
smtpd_sasl_auth_enable = no
smtp_sasl_auth_enable = yes
smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
smtpd_sasl_local_domain = $myhostname
smtp_sasl_security_options = noanonymous
#smtp_sasl_security_options =
smtp_sasl_tls_security_options = noanonymous
smtpd_sasl_application_name = smtpd
Code: Select all
[smtp.xmsnet.nl] myname:mypassword
Code: Select all
postmap /etc/postfix/sasl_passwd
/etc/init.d/postfix restart
For your information
Using GMail to send mail works.
i used http://souptonuts.sourceforge.net/postfix_tutorial.html
and upgrade postfix using the etch repository.
works great!
Cheers
Eek
Using GMail to send mail works.
i used http://souptonuts.sourceforge.net/postfix_tutorial.html
and upgrade postfix using the etch repository.
works great!
Cheers
Eek