Easyfind

[miles]

There seems to be nothing here about Easyfind. Interesting, its not working for me - just takes me to the excito homepage, though it is registered in the web interface and all - please tell me I am being stupid and how

Yours,

Miles

[squadra]

Are you sure it is the excito homepage? The page on the bubba (/home/web) looks a lot like the excito homepage but has adminstration login at richt top corner! I think this must be it, because if you enter an unknown easyfind url in your browser you see the message "no link found" and not the excito homepage.

If you are sure it is not showing your own webpage then check following.

Is you bubba accessible from outside (is your router portforwarding to your bubba correct, i guess not please read documentation?)? When you activate it you will see the ip besides it, if you enter this ip in the url of your browser do you get the bubba2 page which is locally on /home/web/ ? So first find out how to make it accessible fro outside.

[pa]

Hi Miles,

I checked the lookup-table and you unit has reported in and has a name pointed to a valid IP-adress. So easyfind seems to be working fine on your unit, and it is probably as squadra said, you do see the default installed startpage from your own unit. (this is located in /home/web/index.html)

Regards
PA, Excito

[rewien]

Hello all,

I tried to connect to bubba from outside my network through internet.


[edit]
http://myeasyfindname.bubbaserver.com

but can't connect to my buba two.

These are my settings:

Network

Other Hostname: server

Workgroup: misterr

Use 'Easyfind' to locate your Bubba: ( external ip is 123.123.123.123)

Easyfind name: myeasyfindname

My Bubba is connected through my router to the internet.

I hoop you can help me,

Rewien

[carl]

Hello all,

I tried to connect to bubba from outside my network through internet.


[edit]
http://myeasyfindname.bubbaserver.com

but can't connect to my buba two.

These are my settings:

Network

Other Hostname: server

Workgroup: misterr

Use 'Easyfind' to locate your Bubba: ( external ip is 123.123.123.123 )

Easyfind name: myeasyfindname

My Bubba is connected through my router to the internet.

I hoop you can help me,

Rewien

You must instruct your router to let traffic inbound on port 80 to be passed onto the bubba.

/Carl

[rewien]

Thank you for your reply Carl,

I forwarded port 80 on my router, but if i type:

http://rewien.bubbaserver.com

It shows my router webinterface instead of bubbatwo's.
Do you know what i did wrong?

Rewien

[squadra]

You forwarded port 80 to the IP of your router (let's say 192.168.1.1) !! Go to your router admin and find your bubba local ip address (on my linksys it was 192.168.1.108 and activated port forwarding 80 to it).

HTTP 80~80 TCP localip active

Also when less experienced don't mention your own IP address or easyfind name to a forum.

[rewien]

Thank you for your help,

I checked if I forwarded my router ip, but no it isn't my router ip is different.

I got bubba two ip adres from bubbatwo it zelf.
when I login as admin. And clicked on Lan, there it say's bubba two ip.

Just in case, I added Bubba two Ip to DMZ in my router.
I got some strange results, now i can acces myname.bubbaserver.com on my network.
But out of my network I get my router web interface.

Thank you for youre patience I hope you can help me out,

Rewien

[pa]

Hi rewien,

I just made an access to your outside name and got the router login-page.
This measns that your router does not forward traffic on port 80 to bubba.

Can you provide us with the modelname of your router, it is not visable on the first page.

/PA

[Eek]

Just a tip

You can use shields up tool at http://www.grc.com
to check which ports are open on your router.

I find it strange that you get router login-page from outside the network!
if you did this on purpose, than ok.
if you did not, i suggest you close off that login page from outside the network.
Or maybe just replace the router with the bubba2

cheers
Eek

[rewien]

Hello all,

My router info:

manufactor:Digiconnect
type router: MIMO Wireless Router
no in my router no ports are open only bubba's ip in inserted in de DMZ zone with port 80 open


rhank you all very much for trying to help me,

Rewien

[Eek]

I think you should reread your routers manual
because port 80 is open to the router login page.
when you are on your network and you open shields up,
what does it say( you can scan common ports)
Don't care to much about the DMZ zone and enable port forwarding
to the bubba's ip.
cheers
Eek

[carl]

Hello all,

My router info:

manufactor:Digiconnect
type router: MIMO Wireless Router
no in my router no ports are open only bubba's ip in inserted in de DMZ zone with port 80 open


rhank you all very much for trying to help me,

Rewien

If I have found the correct router, this guild should help: http://www.portforward.com/english/rout ... 8/HTTP.htm

/Carl

[rewien]

Hello all,

Thank you for the Guide Carl.
I also found my router manual:

http://members.chello.nl/r.pale/routermanual.htm

only thing i changed in my router's configuration from it's default are:
login pasw
enabled wireless
added Bubba two ip to DMZ

Thank you al trying to help me!
Gr. Rewien

[pa]

Hi again,

If you experience problems with portforwards and are having problems accessing bubba from the outside, also consider setting up your network according to scenario 4 in the manual in page "network setup options".
Do not forget to enable dhcp on bubba again and disable it on your old router.

Most likely the manual on the website has more updates to it than the one on your bubba (your manual on bubba wlll be updated when we release the next update).

http://download.excito.net/web/BubbaTwo ... index.html