New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !

No WAN access after "Bubba stopped during load"

Got problems with your B2 or B3? Share and get helped!
Post Reply
udo
Posts: 17
Joined: 25 Sep 2008, 18:10

No WAN access after "Bubba stopped during load"

Post by udo »

During ftp transfer today, Bubba again stopped and I had reboot it via the power button. After reboot, I could access Bubba but there was no WAN access at all. I did another power down (via the web interface) but the problem is persistent. Now I have a work.around with my old router and using Bubba as a mini server.

Any suggestions on a solution that could fix this would be very much appreciated ...
udo
Posts: 17
Joined: 25 Sep 2008, 18:10

No WAN access after "Bubba stopped during load" -

Post by udo »

Well, WAN access disapperead with the new router ~48 hours again. Removed my telephone modem that I have in front of my router (have worked w/o problem for 8 months) and WAN access was back again. Swtiched to Bubba and everything is now fine.
Post Reply