forum.excito.com

Hi,

I plan to change my Bubba Two internal 1Tb disk to a 2 Tb disk.
What is the best way to accomplish this?

I have access to two USB bays and CloneZilla so my current plan is to
- 1) dismount the 1TB disk from Bubba Two,
- 2) attach both the 1TB disk and the 2TB disk to USB bays attached to a PC and
- 3) clone the 2TB from the 1TB with CloneZilla SW
- 4) mount the 2TB disk into Bubba Two housing and reboot.

Any reason why Bubba Two should not work after the upgrade?

//Kristian

I've never used Clonezilla in quite that way before. Would you not end up with a 1TB partition on the new disk as well so you'd have to expand the partition using GParted?