Howto install bubba on RAID-1 array (system and data)
Posted: 11 Nov 2011, 21:51
Hello everyone,
I writed a first version of my experience in installing a bubba 2 software on RAID-1 arrays. The page is on the wiki at Install_Bubba_2_on_RAID-1_volumes. Feel free to check it out and correct/improve things !
Although it is possible to do the install without a serial console access, I would't recommend it. In case of failure the serial console is the only way to access u-boot environment, since the u-boot utils don't work in the rescue system (static binaries won't work, I guess that's because kernel in the rescue environment is too old).
I writed a first version of my experience in installing a bubba 2 software on RAID-1 arrays. The page is on the wiki at Install_Bubba_2_on_RAID-1_volumes. Feel free to check it out and correct/improve things !
Although it is possible to do the install without a serial console access, I would't recommend it. In case of failure the serial console is the only way to access u-boot environment, since the u-boot utils don't work in the rescue system (static binaries won't work, I guess that's because kernel in the rescue environment is too old).