So, I know the question will be asked eventually: Does the atheros card/kernel in the b3 support monitor mode/injection? Yes it does. I've gotten kismet, aircrack-ng, reaver, and pyrit all compiled and tested.
To save you all some headaches: reaver will fail to configure/compile, complaining about pcap_open_live not being in -lpcap, but the configure script is broken and lying to you. In order to install reaver, you must first install sqlite3-dev from apt.
Now, all I need to do is get metasploit on here, and modify the webif so I can point-click-pwn from my B3
- ShadowHatesYou
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Cracking WEP/WPA with the B3
-
- Posts: 7
- Joined: 03 Mar 2012, 23:19
Re: Cracking WEP/WPA with the B3
I was helping a friend w/ his B3, and it turns out actually there's more that needs to be done, pcap *does* need to be built(I had done this for something else), but it will still complain after you resolve that because it will lack sqlite3 still. So,
1) wget http://www.tcpdump.org/release/tcpdump-4.2.1.tar.gz
2) tar xzvf tcpdump-4.2.1.tar.gz
3) cd tcpdump-4.2.1
4) apt-get install flex
5) nano -w Makefile, go to line 27, replace "prefix = /usr/local/" with "prefix = /usr/". Save.
6) ./configure; make; make install;
7) apt-get install libsqlite3-dev;
build reaver-1.4 from it's dir w/ ./configure; make; make install;
Cheers.
1) wget http://www.tcpdump.org/release/tcpdump-4.2.1.tar.gz
2) tar xzvf tcpdump-4.2.1.tar.gz
3) cd tcpdump-4.2.1
4) apt-get install flex
5) nano -w Makefile, go to line 27, replace "prefix = /usr/local/" with "prefix = /usr/". Save.
6) ./configure; make; make install;
7) apt-get install libsqlite3-dev;
build reaver-1.4 from it's dir w/ ./configure; make; make install;
Cheers.
Re: Cracking WEP/WPA with the B3
Hi all, the off-topic discussions now removed. Hope all are fine with this. Back to business.
@Binkem, thanks. I jumped in, hope you didn't mind.
@Mark / Webalyst, some "irrelevant information" as you called it also followed this cleanup. Please re-post.
with love,
@Binkem, thanks. I jumped in, hope you didn't mind.
@Mark / Webalyst, some "irrelevant information" as you called it also followed this cleanup. Please re-post.
with love,
/Johannes (Excito co-founder a long time ago, but now I'm just Johannes)
-
- Posts: 57
- Joined: 25 Aug 2007, 11:56
Re: Cracking WEP/WPA with the B3
Worth noting that on a stock B2, you also need to run
apt-get install libpcap-dev
otherwise the ./configure of tcpdump fails...
apt-get install libpcap-dev
otherwise the ./configure of tcpdump fails...
-
- Posts: 57
- Joined: 25 Aug 2007, 11:56
Re: Cracking WEP/WPA with the B3
Worth noting that on a stock B2, you also need to run
apt-get install libpcap-dev
otherwise the ./configure of tcpdump fails...
Also, I needed to run the tcpdump ./configure first, in order to get a Makefile that could then be edited according to the above.
/Göran
apt-get install libpcap-dev
otherwise the ./configure of tcpdump fails...
Also, I needed to run the tcpdump ./configure first, in order to get a Makefile that could then be edited according to the above.
/Göran