z-stick aeotec gen5 cant get it working....
Posted: 10 Mar 2018, 07:07
Hello,
I bought a zwave z-stick aeotec gen5 for home automation use on the B3.
Clean install debian stretch.
dmesg | grep acm
[ 10.760884] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device
[ 10.782763] usbcore: registered new interface driver cdc_acm
[ 10.788449] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Seams that z-stick is working on ttyACM0 without problems
ls -al /dev/ttyACM0
crwxrwxrwx 1 root dialout 166, 0 Mar 7 11:15 /dev/ttyACM0
When i install openhab2 I cannot see the z-stick and serial port to add to openhab.
Z-wave is turned on in openhab2.
What am I missing?
Tried home automation but cannot see z-stick as well as controller....
Spend hours searching and testing but cannot see / control z-stick......
I can buy a raspberry pi 3 but would like to get it working on the B3....
On laptop z-sticks works (windows 7) so stick is OK
Puma
ps couldn't get domoticz for testing due to fact I could not find any ARM32 package
I bought a zwave z-stick aeotec gen5 for home automation use on the B3.
Clean install debian stretch.
dmesg | grep acm
[ 10.760884] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device
[ 10.782763] usbcore: registered new interface driver cdc_acm
[ 10.788449] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Seams that z-stick is working on ttyACM0 without problems
ls -al /dev/ttyACM0
crwxrwxrwx 1 root dialout 166, 0 Mar 7 11:15 /dev/ttyACM0
When i install openhab2 I cannot see the z-stick and serial port to add to openhab.
Z-wave is turned on in openhab2.
What am I missing?
Tried home automation but cannot see z-stick as well as controller....
Spend hours searching and testing but cannot see / control z-stick......
I can buy a raspberry pi 3 but would like to get it working on the B3....
On laptop z-sticks works (windows 7) so stick is OK
Puma
ps couldn't get domoticz for testing due to fact I could not find any ARM32 package