forum.excito.com

Running from Gentoo BUBBA|2 Live Release (USB Stick) | Welcome to Gentoo Linux for the B2 miniserver! | | Live-USB maintainer: sakaki <sakaki@deciban.com> | b2 ~ # fdisk -l /dev/sda Disk /dev/sda: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (log...

Mouette - Here is the Install.log from my attempt with BUBBA|2 to upgrade (Jessie). Only change I made to Install.ini was to change WIPE = FALSE ** obviously an issue with partition boundaries ** 2016-09-18 07:04:17.563 - INFO - Running Excito installer version 1.0 daemon process with pid 115 2016-0...

Tweety - When I received my Bubba and Bubba|2 ... BOTH times my Excito products were "held hostage" at NYC customs (Kennedy) demanding $$ Goodfellas still exists ... BTW . Excito claimed ignorance ( we handed it to Swedish Post ). The first time, they let it pass after sitting in NYC for 2...

I started the BACKUP of my Storage Directory on the Bubba|2 (~1.3 TB) ..... that will take awhile.

In the meantime, I have followed instructions by MouettE to create Debian jessie image 1.0
on the USB boot key for my Bubba|2.
I edited the file: install.ini for non-wipe mode.

greg

axm -

My Excito B2 is also running old kernel (2012), so I need to decide path forward.

b2:~$ uname -a
Linux b2 2.6.39.4-13 #1 Sat Apr 21 00:42:46 CEST 2012 ppc GNU/Linux

greg

Rodeus (Montreal, Quebec, Canada), for North American clients, now lists the Excito B3 (without disk) for $85.00
http://excitostore.com

greg

I have had very good luck with the Western Digital RED series.
For my B2, I used the 2 TB model -- very quiet and cooler operation.

Newark (USA) and Farnell (UK) stock this SAMTEC connector. SAMTEC MEC1-108-02-L-D-RA1-SL Connector, MEC1-RA Series, Card Edge, Receptacle, 14, 1 mm, Surface Mount This is the SAMTEC data sheet http://cloud.samtec.com/catalog_english/mec1_em.pdf Newark http://www.newark.com/samtec/mec1-108-02-l-d-ra1...

EasyFind is again working.
At my firewall/router, tbe TCP port 80 (http) was open to the B2,
BUT I also had to open TCP port 8080. Not unusual for other similar systems.

Well. the EasyFind service appears to be working today (Sunday, 15:15 UTC),
but stops at my network Firewall (not B2) -- so I will have to "re-edit" those settings to have it access the B2 on that LAN.

gb

Gordon -
Know that part.

Firmware upgrade for B2 appears to still "hard-code": http://xxxx.myownb2.com
for Easy Find usage. More than happy to change config in Debian,
as long as target server will be around -- more than a few months.

gb

No, not working.
What is the correct domain name, after all the changes??
... settings change required to B2 ?

I can bring up the ns1.mybubba.org directory -- but it just shows test directory.

The servers were migrated. You should no longer reference 'mybubba' but use 'excito' like before

OK. I see that Easyfind not working (for my B2).

Under Settings -> Identify -> Easyfind Options -> http://xxxx.myownb2.com
xxxx is Easyname name that I have.

What changed?

greg

Happen to check the Excito website and forum earlier today,
and saw notice about version 2.6.3.0 update.
Happy to report that using the standard web interface that Update installation was successful.
It was installed in about 90 seconds.

g. beat
chicago

The Excito "B2" model (current Linux versions) will only support up to 2 TB drives. I installed a new Western Digital 2TB RED (NAS) hard drive, part number: WD20EFRX then installed (and updated) the Bubba 2 image. Appears to be working fine, now with 4 times the storage ! I noticed that th...