forum.excito.com

Hello,

Somebody has wifi AP running on jessie allready?

Puma

Hello, I'm running Jessie now (BIG thanks to MouettE!!) I installed owncloud 8.2, firehol, Apache, Samba, midnight commander, Can anyone tell me how I can install/configure the following: 1. Enable and configure Wifi (for standard excito wifi card, unex dnxa-92) 2. Install miniDNLA 3. Raid system wi...

MouttE,

Thanks for the update!

Does the minimal debian include a firewall, postfix, samba, apache, fetchmail, openssh?
Or do we have to install that personally?

Puma

This is really great news!!
Now running standard 2.6.0.2 on 3x B3 servers..

Will it be a complete image we can install from usb stick?
If not can you please write a how to update/install for users like me (not afraid of ssh but not a linux master)

Thanks for the work!!

Puma

Gordon, Which lots of interest i follow your development on Gentoo. I would like to express my respect for the way you ported the Gentoo on the B3! My goal was to upgrade my b3 units to wheezy because it was the next thing after squeeze and on debian (so I didn't have to learn new things...) My wish...

The B2 and B3 are fanless so you need a low consumption harddisc to get the tempature as low as possible. Thats why a WD green is advised. But you got a WD RED which a good solution as well. (low power consumption) WD green and red have an intelly park function (head park) every 8 seconds... this le...

Dear Gordon, Thank you for your quick and thorough answer. This evening I updated the u-boot of one of my B3's I downloaded the minimal install wheezy from MouettE http://forum.mybubba.org/viewtopic.php?f=7&t=4477&p And the Kernel 3.2 for B2/B3 from MouettE http://forum.mybubba.org/viewtopic...

Dear all, Via the webinterface did not work. Working solution: Install nfs on both servers: apt-get install portmap nfs-common apt-get install nfs-kernel-server apt-get install nfs-common check server: /etc/init.d/portmap restart /etc/init.d/portmap status check if portmapper is running rpcinfo -p e...

Hello, I'm thinking of the best way to upgrade. I have several B3's running 2.6.0.2 fine. I just want to run onwcloud 8 and be somehow protected. PHP 5.3.3 is old and needs to be replaced to run owncloud 8. Option 1. Arch Never operating system but i lose the webinterface i love very much. Option 2....

Hello, I have two b3 servers. One is my main server and the other one is used as extra storage. When on my work I can connect perfectly to the Main b3 but I cannot see the 2nd b3. Is it possible to mount the storage folder share to the b3 main server /external/b3nd folder so that I can acces the 2nd...

Hello, This weekend I have done the following: 1. replaced battery and yes there was some slight corrosion underneath the battery so I thought I found the problem :D 2. Booted with the Gentoo live usb stick and could log in and fix the RTC as written by Sakaki This worked I could set the time and da...

Tried mtest for 2 hours no error.

Puma

Dear Sakaki, It took some time to find and create a usb stick. U-Boot 2010.06 (Jun 10 2011 - 09:06:51) BUBBA|3 SoC: Kirkwood 88F6281_A0 DRAM: 512 MiB In: serial Out: serial Err: serial Net: egiga0, egiga1 88E1116 Initializing on egiga0 @08 done 88E1116 Initializing on egiga1 @18 done Hit any key to ...

My output with printenv: B3> printenv bootdelay=1 baudrate=115200 preboot= loadaddr=0x800000 console=ttyS0 bootfile=uImage flashfile=u-boot.kwb installfile=install.itb setdiskargs=setenv bootargs root=$diskdev console=$console,$baudrate serial=${serial#} key=$key button=$button setbootargs=setenv bo...

Hello, I have a B3 which will not boot. Tried reinstall with working usb stick (working perfectly on other B3) I created a serial console and it hangs on boot see serial output below. green light keeps on. **** serial output**** U-Boot 2010.06 (Jun 10 2011 - 09:06:51) BUBBA|3 SoC: Kirkwood 88F6281_A...