connecting B2
Posted: 26 Apr 2011, 07:45
Hi
When I connect my B2 in Server mode via an ethernet cable to my ADSL/router/wifi modem I have the following problem.
The only problem is the server instructions say connect via lan not wan.
Any help?
Thanks
Drew
When I connect my B2 in Server mode via an ethernet cable to my ADSL/router/wifi modem I have the following problem.
It does notYour Bubba|Two has an auto detect function on the LAN port. This means that Bubba|Two will search the LAN for an DHCP server. If a DHCP server is found, Bubba|Two will configure itself to obtain an IP address on the LAN port.
This does not happen eitherIf no DHCP server is found, Bubba|Two will fall back to the static IP address 192.168.10.1.
It does 192.168.1.3Bubba|Two will obtain an IP address automatically on the WAN port.
The only problem is the server instructions say connect via lan not wan.
Any help?
Thanks
Drew