Page 1 of 1

Howto install bubba on RAID-1 array (system and data)

Posted: 11 Nov 2011, 21:51
by MouettE
Hello everyone,

I writed a first version of my experience in installing a bubba 2 software on RAID-1 arrays. The page is on the wiki at Install_Bubba_2_on_RAID-1_volumes. Feel free to check it out and correct/improve things !

Although it is possible to do the install without a serial console access, I would't recommend it. In case of failure the serial console is the only way to access u-boot environment, since the u-boot utils don't work in the rescue system (static binaries won't work, I guess that's because kernel in the rescue environment is too old).

Re: Howto install bubba on RAID-1 array (system and data)

Posted: 05 Sep 2018, 14:26
by janeks
The link is broken.
Are somewhere there alternative?

Re: Howto install bubba on RAID-1 array (system and data)

Posted: 05 Sep 2018, 16:47
by MouettE

Re: Howto install bubba on RAID-1 array (system and data)

Posted: 16 Sep 2018, 05:27
by janeks
Thank you! :)