Hello!
I have one question about the Bubba server.
Is it possible to connect an USB hub to the Bubba to get more USB ports? I today have two printers and two external harddisks that have USB connection. Therefore I wonder if it possible by the hub connect all four devices and get them working trough Bubba.
Have any one used som similiar solution with Bubba?
/Sebbe
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Get more USB ports?
An (/some*) USB Hub will work, but keep in mind that
- You will share the bandwidth amongst devices connected, so split your drives evenly over the two existing Bubba USB ports.
- Don't draw (excessive-) power from the Bubba's USB port, use externally powered harddrives, or use an powered hub!
*note
Cannot guarantee that all hub models will work, but chances are fair that most will.
A hub from Belkin WILL work (as it does here ;-)
Rgds
- You will share the bandwidth amongst devices connected, so split your drives evenly over the two existing Bubba USB ports.
- Don't draw (excessive-) power from the Bubba's USB port, use externally powered harddrives, or use an powered hub!
*note
Cannot guarantee that all hub models will work, but chances are fair that most will.
A hub from Belkin WILL work (as it does here ;-)
Rgds