B2 Crash after RAID installation
Posted: 17 Aug 2009, 12:35
Hi,
i've bought an IOMEGA Prestige external HDD 500Gb and i've connected via eSATA to B2 for RAID function. The raid mirroring was created without problems.
The problems in list is:
1) when i connect the hdd to bubba2 (and b2 is OFF) he don't put in sync automatically the hdd. I see a screen as in imagine 1. When i select RAID, i see a screen as in image 2 that show that the hdd is "in sync" but is not real, because i don't see move the light of hdd. To start sync i've to push the button "recover raid", the system delete the hdd and restart to sync. Afther this i see the light of external hdd in movement, so i'm sure that raid is working.
2) When RAID work, the B2 become VERY HOT, the surface is about 50-60°C and the HDD eSATA do the same. After 1h approximately the B2 CRASH. Stop to work, don't respond to any command even the power button in the back, the only solution is to disconnect power, wait until B2 is cold, power on and "recover raid" again!
See below the part of the syslogs before crash:
Aug 17 17:08:01 bubba ftd: Tracker announce failed: tracker error
Aug 17 17:08:35 bubba fetchmail[2193]: awakened at Mon 17 Aug 2009 05:08:35 PM CEST
Aug 17 17:08:38 bubba fetchmail[2193]: sleeping at Mon 17 Aug 2009 05:08:38 PM CEST for 300 seconds
Aug 17 17:09:37 bubba /USR/SBIN/CRON[3915]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Aug 17 17:10:38 bubba /USR/SBIN/CRON[3928]: (root) CMD (test -x /usr/bin/php && /usr/bin/php /usr/share/horde3/scripts/alarms.php)
HERE I'VE RESTART THE SYSTEM
Aug 17 18:02:49 bubba syslogd 1.4.1#18: restart.
Any ideas?
i've bought an IOMEGA Prestige external HDD 500Gb and i've connected via eSATA to B2 for RAID function. The raid mirroring was created without problems.
The problems in list is:
1) when i connect the hdd to bubba2 (and b2 is OFF) he don't put in sync automatically the hdd. I see a screen as in imagine 1. When i select RAID, i see a screen as in image 2 that show that the hdd is "in sync" but is not real, because i don't see move the light of hdd. To start sync i've to push the button "recover raid", the system delete the hdd and restart to sync. Afther this i see the light of external hdd in movement, so i'm sure that raid is working.
2) When RAID work, the B2 become VERY HOT, the surface is about 50-60°C and the HDD eSATA do the same. After 1h approximately the B2 CRASH. Stop to work, don't respond to any command even the power button in the back, the only solution is to disconnect power, wait until B2 is cold, power on and "recover raid" again!
See below the part of the syslogs before crash:
Aug 17 17:08:01 bubba ftd: Tracker announce failed: tracker error
Aug 17 17:08:35 bubba fetchmail[2193]: awakened at Mon 17 Aug 2009 05:08:35 PM CEST
Aug 17 17:08:38 bubba fetchmail[2193]: sleeping at Mon 17 Aug 2009 05:08:38 PM CEST for 300 seconds
Aug 17 17:09:37 bubba /USR/SBIN/CRON[3915]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
Aug 17 17:10:38 bubba /USR/SBIN/CRON[3928]: (root) CMD (test -x /usr/bin/php && /usr/bin/php /usr/share/horde3/scripts/alarms.php)
HERE I'VE RESTART THE SYSTEM
Aug 17 18:02:49 bubba syslogd 1.4.1#18: restart.
Any ideas?