Hi, any one know if is possible to install amule in bubba ??
Thanks,
Paolol61
New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Amule
i don't think amule can be installed, but you can take a look about mldonkey here:
http://excito.org/forum/viewtopic.php?t=88
http://excito.org/forum/viewtopic.php?t=88
That's a good occasion to make some linux experience
Amule, iirc, only work with a graphical interface. Since bubba is an headless system (no display), it can't easily run.
On the other side mldonkey doesn't have a graphical interface, it instead have an http interface, so you control it with a browser as if it was a web application. I like very much this solution as it uses little resources, gives you a graphical interface nonetheless, and i'm able to control my mldonkey over the internet from work
Amule, iirc, only work with a graphical interface. Since bubba is an headless system (no display), it can't easily run.
On the other side mldonkey doesn't have a graphical interface, it instead have an http interface, so you control it with a browser as if it was a web application. I like very much this solution as it uses little resources, gives you a graphical interface nonetheless, and i'm able to control my mldonkey over the internet from work
I have succeeded to install the amule-daemon package on bubba. The instructions are in the following link: http://wejump.ifac.cnr.it/pages/docs/bubba/amule.html
The packages for Debian sarge are available at http://www.backports.org, even if (and just for the ARM architecture...) there is a problem with broken dependencies that prevent the installation. Packages with corrected dependencies can be downloaded from the instructions page linked above.
Note: installation require an upgrade to the official Debian sarge package repositories
The packages for Debian sarge are available at http://www.backports.org, even if (and just for the ARM architecture...) there is a problem with broken dependencies that prevent the installation. Packages with corrected dependencies can be downloaded from the instructions page linked above.
Note: installation require an upgrade to the official Debian sarge package repositories
Re: Amule
# Create a user AMule , after which the client will be executed.
# Install the packages with dpkg . Setup aMule daemon will ask if you want to start the daemon at startup, and the user will be devoted to its operation.
# To simplify the recovery of files, change the configuration of AMule.Incoming and Temp folders to get them directly into the home directory of aMule uses, instead of under hidden-directory configuration.
# Please specify AcceptExternalConnections = 1 in the configuration file to allow connections to AMule client from other computers .
# Open port TCP 4662 and UDP 4665 and 4672 on your network firewall control.
# Install the packages with dpkg . Setup aMule daemon will ask if you want to start the daemon at startup, and the user will be devoted to its operation.
# To simplify the recovery of files, change the configuration of AMule.Incoming and Temp folders to get them directly into the home directory of aMule uses, instead of under hidden-directory configuration.
# Please specify AcceptExternalConnections = 1 in the configuration file to allow connections to AMule client from other computers .
# Open port TCP 4662 and UDP 4665 and 4672 on your network firewall control.