New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !
Anyone tried installing..
Anyone tried installing..
..glftpd on bubba?
I've tested as someone stated in the forums before the "openssl speed aes" command to benchmark bubba AES encryption throughput, it supports around 1 MB/s quite ok if you ask me...
I've tested as someone stated in the forums before the "openssl speed aes" command to benchmark bubba AES encryption throughput, it supports around 1 MB/s quite ok if you ask me...
Re: Anyone tried installing glftpd...
Is there any news regarding this topic? Last replay was made 15 may 2007..
I really would like to install glftpd on my new B3, since I heard it's a great ftp deamon.
I really would like to install glftpd on my new B3, since I heard it's a great ftp deamon.
Re: Anyone tried installing..
I too am wondering this, if it works, then the Bubba B3 is surely something I would buy to replace my computer as it would be more energy efficient and small form factor. Can anyone of the admins please fix this, 10 months since the last reply here now.
edit: i have now learned that glftpd is closed source and thus cannot be recompiled on any other cpu platform![Sad :-(](./images/smilies/icon_e_sad.gif)
edit: i have now learned that glftpd is closed source and thus cannot be recompiled on any other cpu platform
![Sad :-(](./images/smilies/icon_e_sad.gif)
Last edited by northbane on 22 Feb 2012, 04:17, edited 1 time in total.
Re: Anyone tried installing..
I'm not a member of Excito but I think the chance for a default install of your glfpd is near-zero. Currently the Bubbas ship with ProFTPD which is a robust safe enterprise-level FTP server. Why would they change that to a niche-player with unknown security risks? I really hope Excito sticks with ProFTPD and spend their dev time on important issues instead!
But then again, if you like this specific software so much, why don't you just download the source and compile and run it yourself?
But then again, if you like this specific software so much, why don't you just download the source and compile and run it yourself?
Re: Anyone tried installing..
Oh yes and the fact that the last release of glftpd was in 2005 does not help either. Or that there are no current developers. Or a source tree.
Re: Anyone tried installing..
glFTPD is closed source and cannot be compiled under ARM.
Re: Anyone tried installing..
bullshit, the source is here:
http://www.glftpd.dk/files/glftpd-LNX_2.01.tgz
http://www.glftpd.dk/files/glftpd-LNX_2.01.tgz
Re: Anyone tried installing..
Team glfTPD has added support for ARM processors, check it out at their website; glftpd.eu
-
- Posts: 2
- Joined: 21 Jan 2014, 12:04
Re: Anyone tried installing..
Hello @all,
has anyone tried the installation on the B3 without any errors?
I've tried it but i got the following two error messages![Sad :(](./images/smilies/icon_e_sad.gif)
ld-linux-armhf.so.3: Failed! You must find & copy ld-linux-armhf.so.3 to /glftpd/lib manually.
ld-linux.so.2: Searching . . . Failed!
What does it mean?
BR
Ben
has anyone tried the installation on the B3 without any errors?
I've tried it but i got the following two error messages
![Sad :(](./images/smilies/icon_e_sad.gif)
ld-linux-armhf.so.3: Failed! You must find & copy ld-linux-armhf.so.3 to /glftpd/lib manually.
ld-linux.so.2: Searching . . . Failed!
What does it mean?
BR
Ben
Re: Anyone tried installing..
armhf (arm hardware floating point) is meant for a type of ARM cpu (v7) that is not compatible with the Kirkwood Bubba (which is armel, software point). At least that is how I understand it. If it is correct, there is a possibility the ARM sources you use cannot be compiled for the B3. But again, I could be completely wrong.
you may be able to trick the compiler:
"Hard floats use an on-chip floating point unit. Soft floats emulate one in software. The difference is speed. It's strange to see both used on the same target architecture, since the chip either has an FPU or doesn't. You can enable soft floating point in GCC with -msoft-float."
(http://stackoverflow.com/questions/3321 ... nt-numbers)
you may be able to trick the compiler:
"Hard floats use an on-chip floating point unit. Soft floats emulate one in software. The difference is speed. It's strange to see both used on the same target architecture, since the chip either has an FPU or doesn't. You can enable soft floating point in GCC with -msoft-float."
(http://stackoverflow.com/questions/3321 ... nt-numbers)
-
- Posts: 2
- Joined: 21 Jan 2014, 12:04
Re: Anyone tried installing..
Mhhhhh this means there is no native support for arm5te devices, right.
I've found some compilation with name "glftpd-toolchain-armeb_v5te_gcc-4.7-linaro_uClibc-0.9.33.2-2.02_rc6" but no success![Sad :(](./images/smilies/icon_e_sad.gif)
Is there an place where we can found different compilations like this?
BR
Ben
I've found some compilation with name "glftpd-toolchain-armeb_v5te_gcc-4.7-linaro_uClibc-0.9.33.2-2.02_rc6" but no success
![Sad :(](./images/smilies/icon_e_sad.gif)
Is there an place where we can found different compilations like this?
BR
Ben
Re: Anyone tried installing..
(more as a note to self, but could be useful for searching the forum for armel or armhf and armel vs. armhf resp.)
![Smile :-)](./images/smilies/icon_e_smile.gif)
I copied both armel and armhf versions from the Debian sash packages (the first package that came to mind with static linking) to the stick and tried to run them: the armel version ran fine, whereas the armhf version Segfaulted.
Also, from https://www.debian.org/ports/arm/ (i.e. armel)
My latest experiment on an ArchLinux LiveUSB seems to support your understandingUbi wrote:armhf (arm hardware floating point) is meant for a type of ARM cpu (v7) that is not compatible with the Kirkwood Bubba (which is armel, software point). At least that is how I understand it.
![Smile :-)](./images/smilies/icon_e_smile.gif)
I copied both armel and armhf versions from the Debian sash packages (the first package that came to mind with static linking) to the stick and tried to run them: the armel version ran fine, whereas the armhf version Segfaulted.
Also, from https://www.debian.org/ports/arm/ (i.e. armel)
As of our latest release, Debian GNU/Linux 6.0.10, the following ARM sub-architectures are fully supported:
[...]
kirkwood: we support Marvell's Kirkwood platform