I am encountering an issue with my B3: it doesn't boot on the HDD anymore.
I have a serial console bounded onto the main board so I can observe the boot sequence and basically it keeps rebooting after saying ** File not found uImage **.
I tried reinstalling Debian stretch (9) image 1.1 from MouettE as well as the official depreciated b3-install-188.8.131.52, getting the same issues after the installations complete.
I tried reflashing U-Boot based on the information in this post http://forum.excito.com/viewtopic.php?f=9&t=5829 with the two methods described by MouettE: the one involving the USB key and the one involving direct serial transfer.
Flashing seemed to work fine but it didn't solve the issue.
Can anyone help me fix my bricked b3?
Here is a detailed log of the boot sequence keeping repeating forever recorded from the serial console:
Code: Select all
U-Boot 2013.01.01-b3-rodeus-g53a85c9 (Jan 16 2016 - 01:59:03)BUBBA|3 SoC: Kirkwood 88F6281_A1 DRAM: 512 MiB WARNING: Caches not enabled SF: Detected M25P16 with page size 64 KiB, total 2 MiB In: serial Out: serial Err: serial Net: egiga0, egiga1 88E1116 Initializing on egiga0 @08 done 88E1116 Initializing on egiga1 @09PHY reset timed out done Hit any key to stop autoboot: 0 ** File not found uImage ** resetting ...